Not sure of the version. I know 2.14 and higher. Check the Handler.pm
module for the word 'Alive'. Also, it may be possible that you are
filtering out that packet before the update could occur in your
radius.cfg file - but I won't say that for sure.
--------------------------------------------------------------------------
Aaron Holtz
ComNet Inc.
UNIX Systems Administration/Network Operations
"It's not broken, it just lacks duct tape."
--------------------------------------------------------------------------
On Mar 25, Steve Lalonde molded the electrons to say....
>I already have this
>
>aaa accounting update newinfo
>
>but it does not update my online list
>
>what version of radiator do i need to get this to work?
>
>Steve Lalonde
>Systems Manager
>ENTANET International Ltd
>I believe the technical term is "Oops!"
>
>
>----- Original Message -----
>From: "Aaron Holtz" <[EMAIL PROTECTED]>
>To: "Steve Lalonde" <[EMAIL PROTECTED]>
>Cc: <[EMAIL PROTECTED]>
>Sent: Saturday, March 25, 2000 4:02 PM
>Subject: Re: (RADIATOR) How do I get a cisco as5300 to give me
>framed-ip-addressin a start record
>
>
>> It doesn't show up in the Start record as it hasn't been assigned yet by
>> the Cisco (at the time the record is generated). Add the following
>> command to your aaa statements:
>>
>> aaa accounting update newinfo
>>
>> You will now get a second record (Called an Alive record, not a Start
>> record). Radiator understands this packet and will update your online
>> databases and other things accordingly with the new information for the
>> user. This packet is generated after ppp is negotiated and the user has
>> their framed IP.
>>
>> --------------------------------------------------------------------------
>> Aaron Holtz
>> ComNet Inc.
>> UNIX Systems Administration/Network Operations
>> "It's not broken, it just lacks duct tape."
>> --------------------------------------------------------------------------
>>
>> On Mar 25, Steve Lalonde molded the electrons to say....
>>
>> >Hi all
>> >
>> >How do I get a cisco as5300 to give me framed-ip-address in an auth
>record
>> >like my 3com hipers do?
>> >
>> >the cisco is running 12.1.1
>> >
>> >
>> >here is a sample from the cisco
>> >
>> >Code: Accounting-Request
>> >Identifier: 57
>> >Authentic: <220><8>T<9>9<230><176><<207>i*<6><141><238>n%
>> >Attributes:
>> > Client-Id = 192.168.115.1
>> > NAS-Port = 1
>> > Cisco-NAS-Port = "Async1"
>> > NAS-Port-Type = Async
>> > User-Name = "steve"
>> > Called-Station-Id = ""
>> > Calling-Station-Id = "xxxxxx"
>> > Acct-Status-Type = Start
>> > Acct-Authentic = RADIUS
>> > Service-Type = Framed-User
>> > Acct-Session-Id = "0000000E"
>> > Framed-Protocol = PPP
>> > Acct-Delay-Time = 0
>> >
>> >
>> >heres what i want (3com hiperarc)
>> >
>> >Code: Accounting-Request
>> >Identifier: 239
>> >Authentic: <195>B<222>-<227>MY<208><167><241><159>"<27><185><230><233>
>> >Attributes:
>> > User-Name = "000110"
>> > Client-Id = 192.168.110.1
>> > Acct-Status-Type = Start
>> > Acct-Session-Id = "117965522"
>> > Acct-Delay-Time = 0
>> > Acct-Authentic = RADIUS
>> > Service-Type = Framed-User
>> > NAS-Port-Type = ISDN
>> > NAS-Port = 1801
>> > USR-Modem-Training-Time = 1
>> > USR-Interface-Index = 3057
>> > Chassis-Call-Slot = 8
>> > Chassis-Call-Span = 1
>> > Chassis-Call-Channel = 9
>> > Unauthenticated-Time = 0
>> > Calling-Station-Id = ""
>> > Called-Station-Id = ""
>> > Modulation-Type = 0
>> > Simplified-MNP-Levels = synchronousNone
>> > Simplified-V42bis-Usage = none
>> > Connect-Speed = 64000-BPS
>> > Framed-Protocol = PPP
>> > Framed-IP-Address = 192.168.117.251
>> > VTS-Session-Key =
>"j<167>j<232><234>A<131>"<221>,}8<167><241><158>g"
>> > Call-Arrived-time = 133539306
>> >
>> >
>> >Framed-IP-Address is all i need but Connect-Speed would be nice to.
>> >
>> >this must be posible.
>> >
>> >Any ideas?
>> >
>> >
>> >
>> >TIA
>> >
>> >Steve Lalonde
>> >Systems Manager
>> >Entanet International Ltd.
>> >Do not meddle in the affairs of sysadmins, for they are
>> >easy to annoy and have the root password.
>> >
>> >
>> >
>> >
>> >
>> >
>> >===
>> >Archive at http://www.starport.net/~radiator/
>> >Announcements on [EMAIL PROTECTED]
>> >To unsubscribe, email '[EMAIL PROTECTED]' with
>> >'unsubscribe radiator' in the body of the message.
>> >
>>
>>
>> ===
>> Archive at http://www.starport.net/~radiator/
>> Announcements on [EMAIL PROTECTED]
>> To unsubscribe, email '[EMAIL PROTECTED]' with
>> 'unsubscribe radiator' in the body of the message.
>>
>
>
>===
>Archive at http://www.starport.net/~radiator/
>Announcements on [EMAIL PROTECTED]
>To unsubscribe, email '[EMAIL PROTECTED]' with
>'unsubscribe radiator' in the body of the message.
>
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
