Hello (again)
I guess I should have been a little more clear on my previous email, so
here goes. This is our current setup:
Radius Server -- CISCO 2600 -- ASCEND
Radiator VPN Setup
We are using the VPDN feature of CISCO to simulate tunneling between our
side and the TELCO.
When a user dials in, it throws authentication to our Radiator and then
checks our database. However, based on the logs, a dialin user cannot get
an IP address (or it seems accounting records) for the connection to go
through (hence my previous question in my email on how to set specific
IPs).
Here is the snippet of the logs:
*** Received from 172.7.10.1 port 1067 ....
Code: Access-Request
Identifier: 16
Authentic: V[<0><0><224><29><0><0><198>v<0><0><184>p<0><0>
Attributes:
User-Name = "username1"
User-Password = "i<6><191><237>j
<182><175><195><127>BEE<190><127><165>"
NAS-IP-Address = 172.7.10.3
NAS-Port = 6159
NAS-Port-Type = Async
Service-Type = Framed-User
Framed-Protocol = PPP
State = ""
Called-Station-Id = "xxx5721"
Acct-Session-Id = "322572039"
Proxy-State = 0
Tue Apr 4 13:51:24 2000: DEBUG: Rewrote user name to username1
Tue Apr 4 13:51:24 2000: DEBUG: Handling request with Handler 'Realm='
Tue Apr 4 13:51:24 2000: DEBUG: Deleting session for username1,
172.7.10.3, 6159
Tue Apr 4 13:51:24 2000: DEBUG: Running command: /radius/radauth
Tue Apr 4 13:51:24 2000: DEBUG: Access accepted for username1 <--- authentication
procedure finished
Tue Apr 4 13:51:24 2000: DEBUG: Packet dump:
*** Sending to 172.7.10.1 port 1067 .... <--- throws it back for accounting
Code: Access-Accept
Identifier: 16
Authentic: V[<0><0><224><29><0><0><198>v<0><0><184>p<0><0>
Attributes:
Proxy-State = 0
Session-Timeout = 21600
As you can see, it doesn't give out the complete information needed to
complete the accounting process.
For comparison purposes, here is a successful login from one of our RAS:
*** Received from 208.155.152.30 port 1645 ....
Code: Access-Request
Identifier: 194
Authentic: f!8f88!fff8!Offf
Attributes:
User-Name = "xxxuser"
User-Password =
"Ky<160><158><251><161><22><191><159><22><131>l`<241>Bg"
NAS-IP-Address = 208.155.152.30
NAS-Port = 39
Service-Type = Framed-User
Framed-Protocol = PPP
<snipped>
Tue Apr 4 13:51:29 2000: DEBUG: Rewrote user name to xxxuser
Tue Apr 4 13:51:29 2000: DEBUG: Handling request with Handler 'Realm='
Tue Apr 4 13:51:29 2000: DEBUG: Deleting session for xxxuser, 208.155.152.30, 39
Tue Apr 4 13:51:29 2000: DEBUG: Running command: /radius/radauth
*** Sending to 208.155.152.30 port 1645 ....
Code: Access-Accept
Identifier: 194
Authentic: f!8f88!fff8!Offf
Attributes:
Session-Timeout = 21600
*** Received from 208.155.152.30 port 1645 .... <-- ACCOUNTING RESPONSE
Code: Accounting-Request
Identifier: 195
Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
Acct-Session-Id = "00000293"
User-Name = "xxxuser"
NAS-IP-Address = 208.155.152.30
NAS-Port = 39
Acct-Status-Type = Start
<snipped>
Where could the problem lie?
TIA!
Sincerely,
Froilan C. Mendoza
Manager - Systems Management
Tridel Technologies, Inc.
http://www.tridel.net
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
