Re: (RADIATOR) Where can I find a "Vendor to Number" list?

[Radiator]

I found a list that lists the enterprise-numbers for the vendors!   http://www.isi.edu/in-notes/iana/assignments/enterprise-numbers ----- Original Message ----- From: Radiator To: RADIATOR Sent: Friday, July 21, 2000 1:02 AM Subject: (RADIATOR) Where can I find a "Vendor to Number" list? I know this has come up before, I cant seem to find out what vendor Attrib this is talking about. I have searched the archive with no luck. What is the best way to track down what vendor this refers to and what A/V=what #? Does anyone keep a list, or is there a good way to research it? (vendor 3041) could be tracked down (vendor ) what if it has no vendor #, what does that mean?   We are just working out the details of implementing xDSL via PPPOA, which we are authentication via radiator. We are an AssuredAccess box to pass the requests off to the radius server. Tech support for our assured box says that it uses the standard dictionary.   In the Logfile   Thu Jul 20 11:03:11 2000: WARNING: Malformed Vendor Specific Attribute with length 6: ignored Thu Jul 20 11:03:11 2000: ERR: Attribute number 26 (vendor ) is not defined in your dictionary Thu Jul 20 11:03:11 2000: ERR: Attribute number 61 (vendor 3041) is not defined in your dictionary Thu Jul 20 11:03:54 2000: ERR: Attribute number 61 (vendor 3041) is not defined in your dictionary Thu Jul 20 11:03:54 2000: ERR: Attribute number 47 (vendor ) is not defined in your dictionary Thu Jul 20 11:03:54 2000: ERR: Attribute number 48 (vendor ) is not defined in your dictionary Thu Jul 20 11:03:54 2000: ERR: Attribute number 52 (vendor ) is not defined in your dictionary Thu Jul 20 11:03:54 2000: ERR: Attribute number 53 (vendor ) is not defined in your dictionary       In the detail log we see this:(IP's have been removed)   Thu Jul 20 11:03:11 2000         User-Name = "test"         Acct-Delay-Time = 0         Acct-Session-Id = "0038986171"         Acct-Status-Type = Start         NAS-IP-Address = xxx.xxx.xxx.xxx         Acct-Authentic = RADIUS         Framed-Protocol = PPP         Service-Type = Framed-User         Framed-IP-Address = xxx.xxx.xxx.xxx         NAS-Port-Type = Async         NAS-Port = 0         Calling-Station-Id = "NONE"         Connect-Info = "Lt.1.2.1.1.394   0     0     MODEM   PPP  PAP  UNKNOWN UNKNOWN UNKNOWN"         Timestamp = 964116191 Thu Jul 20 11:03:54 2000         User-Name = "test"         Acct-Delay-Time = 0         Acct-Session-Id = "0038986171"         Acct-Status-Type = Stop         NAS-IP-Address = xxx.xxx.xxx.xxx         Acct-Authentic = RADIUS         Framed-Protocol = PPP         Service-Type = Framed-User         Framed-IP-Address = xxx.xxx.xxx.xxx         NAS-Port-Type = Async         NAS-Port = 0         Calling-Station-Id = "NONE"         Acct-Terminate-Cause = Port-Error         Acct-Session-Time = 48         Acct-Input-Octets = 382         Acct-Output-Octets = 0         Connect-Info = "Lt.1.2.1.1.394   0     0     MODEM   PPP  PAP  UNKNOWN UNKNOWN UNKNOWN"         Timestamp = 964116234   Thanks,   Chris