Hi everyone,
Is anyone having problems with hung ISDN sessions on radwho with
TotalControl HiPer DSPs?
Everytime an ISDN user logs into a HiPer DSP his 2nd channel does not
disconnect from radwho. I've noticed in the accounting logs that there
is no 'Stop' session for the 2nd channel. Also, the Acct-Session-Id is
the same for both channels. Is this right? If so, how do I update the
radwho.cgi program for this?
This is causing problems for our ISDN users. When a user logs in the
next time around, radwho still sees that second session there and will
only allow the user (1) channel.
Any suggestions?
Thanks,
Janet
Thu Aug 31 17:12:06 2000
User-Name = "mikesan+static"
NAS-IP-Address = 202.128.65.11
Acct-Status-Type = Start
-> Acct-Session-Id = "34471939"
Acct-Delay-Time = 0
Acct-Authentic = RADIUS
Service-Type = Framed-User
NAS-Port-Type = ISDN
-> NAS-Port = 527
Calling-Station-Id = "removed"
Called-Station-Id = "removed"
Framed-Protocol = PPP
Framed-IP-Address = 202.128.69.13
Timestamp = 967705926
Request-Authenticator = Unverified
Thu Aug 31 17:12:08 2000
User-Name = "mikesan+static"
NAS-IP-Address = 202.128.65.11
Acct-Status-Type = Start
-> Acct-Session-Id = "34471939"
Acct-Delay-Time = 0
Acct-Authentic = RADIUS
Service-Type = Framed-User
NAS-Port-Type = ISDN
-> NAS-Port = 526
Calling-Station-Id = "removed"
Called-Station-Id = "removed1"
Framed-Protocol = PPP
Framed-IP-Address = 202.128.69.13
Timestamp = 967705928
Request-Authenticator = Unverified
Thu Aug 31 17:12:49 2000
User-Name = "mikesan+static"
NAS-IP-Address = 202.128.65.11
Acct-Status-Type = Stop
-> Acct-Session-Id = "34471939"
Acct-Delay-Time = 0
Acct-Authentic = RADIUS
Service-Type = Framed-User
NAS-Port-Type = ISDN
-> NAS-Port = 527
Calling-Station-Id = "removed"
Called-Station-Id = "removed"
Framed-Protocol = PPP
Framed-IP-Address = 202.128.69.13
Acct-Session-Time = 41
Acct-Terminate-Cause = User-Request
Acct-Input-Octets = 1774
Acct-Output-Octets = 1900
Timestamp = 967705969
Request-Authenticator = Unverified
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
