RE: (RADIATOR) Problem with Cisco NAS

[Gildas PERROT]

Hi Arslan,   I succeeded to make Cisco 5300 working with Radiator. You need the following lines on Cisco to make IP address reservation :   aaa new-model aaa authentication ppp wap group radius aaa authorization network default group radius aaa accounting update newinfo aaa accounting network wap start-stop group radius   interface Group-Async0  ip unnumbered Ethernet0  no ip directed-broadcast  encapsulation ppp  async dynamic address  async mode interactive  ppp authentication chap pap wap  ppp accounting wap  group-range 1 60  hold-queue 10 in   radius-server host <IP> auth-port 1645 acct-port 1646 key <KEY> user profile should returned 'Service-Type = Framed-User',  'Framed-Protocol = PPP' and 'Framed-IP-Address' attributes.   Good luck.                Gildas. -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]De la part de Arslan Saeed Envoy� : jeudi 14 septembre 2000 08:25 � : [EMAIL PROTECTED] Objet : (RADIATOR) Problem with Cisco NAS Hi,   We are facing problem in radiator implementation with Cisco AS5300 NAS. It seems that Cisco NAS is really picky in understanding attributes replied by radiator; like IP address reservation , session-timeout etc. I have checked the configuration of both NAS and radiator and all look good. Radiator is correctly replying attrbutes but NAS somehow does not implement them. We were using Tacacs+ earlier and it worked fine with Cisco. If anyone of you have implemented radiator with Cisco , please suggest some solution.     kind regards, arslan.