Hello,
I'm trying to assign different IP addresses for the same user, depending on
the NAS he is logging in.
I'm using <AuthBy DYNADDRESS> and <AddressAllocator SQL>
Users are in a SQL database , I use <AuthBy SQL>
The other thing I'm trying to do is NOT to allow users to log on all NASes.
Here is the complete picture.
I have 5 NASes, let's call them N1a, N1b, N2a, N2b and M
All of the users are allowed to log on M, wich has its own pool of IP
addresses.
Some users can connect to N1a and N1b (on top of M), but not on N2a nor N2b
some can connect to N2a and N2b (on top of M), but not N1a nor N1b
and finally some users (very few) can connect to all 5 NASes
Here's an another requirement : Users logging on N2a ou N2b must get a
static IP address
Users logging on N1a and N1b are always getting a dynamic IP address and
users logging on M can sometimes get a static IP address and sometimes not,
depending on the user.
to sum this up:
N1a and N1b are always assigning dynamic IPs
N2a and N2b are always assigning static IPs
M can do both, depending on the user (but M has it's own addresses)
I have 2 pools of addresses (one for M and one for N1a and N1b) and a bunch
of static addresses (for N2a and N2b)
Let's take an example, cause I'm not sure I'm very clear....
there can be 4 different types of user
* users that can log into N1a, N1b and M (with a dynamic address on M)
when they connects to N1a or N1b they should get an IP address from pool 1
when they connects to M they should get an IP address from pool 2
* users hat can log into N2a, N2b and M (with a dynamic address on M)
when they connects to N1a or N1b they should get a static IP
when they connects to M they should get an IP address from pool 2
* users that can log into N2a, N2b and M (with a static address on M)
when they connects to N1a or N1b they should get a static IP address
when they connects to M they should get an other static IP address
* users that can log into N1a, N1b, N2a, N2b and M (with a static address on M)
when they connects to N1a or N1b they should get a static IP address
when they connects to M they should get an other static IP address
How can I set up the users to have these different profiles?
How can I set up the clients to get the working differently with the same
users?
Thank you for any help on this.. hoping I was clear enough to expose my
problem.
David Nguyen
H.R.Net
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
