(RADIATOR) Problems with SSHA password encription.

[Carles Xavier Munyoz Bald�]

Hi,
I have Radiator 2.16.3
I'm using a DBM file to store my dialup users information using the
encrypted format:
myuser:Password="{SSHA}tZ9dh9AZ42Nih8L5WWz7hvXHXB1meQ==",Client-Port-DNIS="111222333"

If I use the radpwtst tool over my radius system, all the authentication
and accounting process goes well, but If I try to connect using a dialup
connection the authentication fails.

Using the snoop tool I see that the resquest arrives to the Radiator and
this is the output generated by the radstock tool:
Request (2f) - 11.11.11.11:1036 -> 22.22.22.22:1812 (L121)
  Proxy-State            Len  6         "**B*"
  User-Name              Len 16         "myuser@domain*"
  CHAP-Password          Len 19         "*w**@{*****')]a|*"
  NAS-Port               Len  6         2183
  NAS-Port-Type          Len  6         Sync
  Service-Type           Len  6         Framed-User
  Framed-Protocol        Len  6         PPP
  State                  Len  2         ""
  Caller-Id              Len 11         "999999999"
  Acct-Session-Id        Len 12         "999999999*"
  Client-Port-DNIS       Len 11         "111222333"
Reject  (2f) - 11.11.11.11:1036 <- 22.22.22.22:1812 (L42)
  Proxy-State            Len  6         "**B*"
  Reply-Message          Len 16         "Request
Denied"                                           


If I change the encrypted format used in the DBM file:
myuser:Password="mypassword",Client-Port-DNIS="111222333"
then all goes fine (with the radpwtst tool and using a dialup
connection).

Have had anyone the same problem ?
Is there any solution to it ?

Many thanks for your time.
---
Carles Xavier Munyoz Bald� / [EMAIL PROTECTED]
Servicios IP - Experto en Sistemas IP
Wanadoo Espa�a - http://www.wanadoo.es/
Tel: +34 96 5040046 - Fax: +34 96 5040047
---

===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.