Hello Jamz -

Could you please send me the name of the registered owner of the 
company that purchased this copy of Radiator?

thanks very much

regards

Hugh





At 17:50 +0930 01/4/9, [EMAIL PROTECTED] wrote:
>Hello,
>       I am trying to configure Radiator to log accounting data to my
>postgres database.
>
>The Authorization works fine, rejects and accepts okay.
>
>However no accounting data arrives in the named accounting table.
>If in my <AuthBy SQL> section I override the default accounting column
>names, I get an error in the trace where it tries to run an INSERT statement
>with no VALUES, i.e.:
>
>INSERT INTO radius_accounting () VALUES ()
>
>gets a syntax error on ')'
><shrug>
>
>Thanks in Advance.
>
>       Jamz.
>
>
>my radius.cfg looks like:
>
># Set this to the database directory. It should contain these files:
># dictionary      The dictionary for your NAS
>DbDir /usr/local/etc/raddb
>
>#AuthPort       1645
>AuthPort        16450
>
>#AcctPort       1646
>AcctPort        16460
>
>#Foreground
>#LogStdout
># User a lower trace level in production systems:
>Trace           4
>
>SnmpgetProg /usr/local/bin/snmpget
>
># This clause defines a single client to listen to
><Client adl-5300-1.airnet.com.au>
>         NasType Cisco
>         Secret  xxxxxx
>         DefaultRealm airnet.com.au
></Client>
>
><Client DEFAULT>
>         Secret  mysecret
>         DupInterval 0
>         DefaultRealm airnet.com.au
></Client>
>
><Realm airnet.com.au>
>         # Take realm off the end of the username before Auth.
>         RewriteUsername s/^([^@]+).*/$1/
>         <AuthBy SQL>
>                 # AuthSelect with empty string means dont do auth
>                 AuthSelect select PASSWORD, CHECKATTR, REPLYATTR FROM
>subscriber WHERE username =%0
>                 DBSource        dbi:Pg:host=dbhost;dbname=bmf
>                 DBUsername      radius
>                 DBAuth          xxxxx
>
>                 AccountingTable radius_accounting
>         </AuthBy>
>
></Realm>
>
>
>The output is as follows:
>[root@radius Radiator-2.18]# radpwtst -user cmma -password xxxxxx -auth_port
>16450 -acct_port 16460 -delay_time 3 -output_octets 3000
>sending Access-Request...
>OK
>sending Accounting-Request Start...
>OK
>sending Accounting-Request Stop...
>OK
>
>
>
>Mon Apr  9 17:45:27 2001: DEBUG: Packet dump:
>*** Received from 127.0.0.1 port 1035 ....
>Code:       Access-Request
>Identifier: 27
>Authentic:  1234567890123456
>Attributes:
>         User-Name = "cmma"
>         Service-Type = Framed-User
>         NAS-IP-Address = 203.63.154.1
>         NAS-Port = 1234
>         Called-Station-Id = "123456789"
>         Calling-Station-Id = "987654321"
>         NAS-Port-Type = Async
>         User-Password =
>"<154><234>+<152><159>l4<146><211>_<9><160><216>}x<153>"
>
>Mon Apr  9 17:45:27 2001: DEBUG: Handling request with Handler
>'Realm=airnet.com.au'
>Mon Apr  9 17:45:27 2001: DEBUG: Rewrote user name to cmma
>Mon Apr  9 17:45:27 2001: DEBUG:  Deleting session for cmma, 203.63.154.1,
>1234
>Mon Apr  9 17:45:27 2001: DEBUG: Handling with Radius::AuthSQL
>Mon Apr  9 17:45:27 2001: DEBUG: Handling with Radius::AuthSQL
>Mon Apr  9 17:45:27 2001: DEBUG: Query is: select PASSWORD, CHECKATTR,
>REPLYATTR FROM subscriber WHERE username ='cmma'
>
>Mon Apr  9 17:45:27 2001: DEBUG: Radius::AuthSQL looks for match with cmma
>Mon Apr  9 17:45:27 2001: DEBUG: Radius::AuthSQL ACCEPT:
>Mon Apr  9 17:45:27 2001: DEBUG: Access accepted for cmma
>Mon Apr  9 17:45:27 2001: DEBUG: Packet dump:
>*** Sending to 127.0.0.1 port 1035 ....
>Code:       Access-Accept
>Identifier: 27
>Authentic:  1234567890123456
>Attributes:
>         Service-Type = Framed-User
>         Framed-Compression = Van-Jacobson-TCP-IP
>
>Mon Apr  9 17:45:27 2001: DEBUG: Packet dump:
>*** Received from 127.0.0.1 port 1035 ....
>Code:       Accounting-Request
>Identifier: 28
>Authentic:  ^<217><168><22><215><254><170>O<146>%<247>l<137><153>q<3>
>Attributes:
>         User-Name = "cmma"
>         Service-Type = Framed-User
>         NAS-IP-Address = 203.63.154.1
>         NAS-Port = 1234
>         NAS-Port-Type = Async
>         Acct-Session-Id = "00001234"
>         Acct-Status-Type = Start
>         Called-Station-Id = "123456789"
>         Calling-Station-Id = "987654321"
>
>Mon Apr  9 17:45:27 2001: DEBUG: Handling request with Handler
>'Realm=airnet.com.au'
>Mon Apr  9 17:45:27 2001: DEBUG: Rewrote user name to cmma
>Mon Apr  9 17:45:27 2001: DEBUG:  Adding session for cmma, 203.63.154.1,
>1234
>Mon Apr  9 17:45:27 2001: DEBUG: Handling with Radius::AuthSQL
>Mon Apr  9 17:45:27 2001: DEBUG: Handling accounting with Radius::AuthSQL
>Mon Apr  9 17:45:27 2001: DEBUG: Accounting accepted
>Mon Apr  9 17:45:27 2001: DEBUG: Packet dump:
>*** Sending to 127.0.0.1 port 1035 ....
>Code:       Accounting-Response
>Identifier: 28
>Authentic:  ^<217><168><22><215><254><170>O<146>%<247>l<137><153>q<3>
>Attributes:
>
>Mon Apr  9 17:45:27 2001: DEBUG: Packet dump:
>*** Received from 127.0.0.1 port 1035 ....
>Code:       Accounting-Request
>Identifier: 29
>Authentic:  <138>?<140><229><153><222><217><234>OC<18><192><230>y<10><147>
>Attributes:
>         User-Name = "cmma"
>         Service-Type = Framed-User
>         NAS-IP-Address = 203.63.154.1
>         NAS-Port = 1234
>         NAS-Port-Type = Async
>         Acct-Session-Id = "00001234"
>         Acct-Status-Type = Stop
>         Called-Station-Id = "123456789"
>         Calling-Station-Id = "987654321"
>         Acct-Delay-Time = 3
>         Acct-Session-Time = 1000
>         Acct-Input-Octets = 20000
>         Acct-Output-Octets = 3000
>
>Mon Apr  9 17:45:27 2001: DEBUG: Handling request with Handler
>'Realm=airnet.com.au'
>Mon Apr  9 17:45:27 2001: DEBUG: Rewrote user name to cmma
>Mon Apr  9 17:45:27 2001: DEBUG:  Deleting session for cmma, 203.63.154.1,
>1234
>Mon Apr  9 17:45:27 2001: DEBUG: Handling with Radius::AuthSQL
>Mon Apr  9 17:45:27 2001: DEBUG: Handling accounting with Radius::AuthSQL
>Mon Apr  9 17:45:27 2001: DEBUG: Accounting accepted
>Mon Apr  9 17:45:27 2001: DEBUG: Packet dump:
>*** Sending to 127.0.0.1 port 1035 ....
>Code:       Accounting-Response
>Identifier: 29
>Authentic:  <138>?<140><229><153><222><217><234>OC<18><192><230>y<10><147>
>Attributes:
>
>===
>Archive at http://www.starport.net/~radiator/
>Announcements on [EMAIL PROTECTED]
>To unsubscribe, email '[EMAIL PROTECTED]' with
>'unsubscribe radiator' in the body of the message.

-- 

NB: I am travelling this week, so there may be delays in our correspondence.

Radiator: the most portable, flexible and configurable RADIUS server
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
Platypus, Freeside, Interbiller, TACACS+, PAM, external, etc, etc.
Available on Unix, Linux, FreeBSD, Windows 95/98/2000, NT, MacOS X.

===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.

Reply via email to