Opps, sorry where I've put the Mail server IP it should be the DNS server IP
Ray
At 11:53 AM 23/05/2001 +1000, you wrote:
>Hi,
>
>Here's a radius profile I use for a person I wish to set up that way. Also
>this for an Ascend Max so will differ depending on the NAS you are using.
>
>Ray
>
><USERNAME> Password = "<PASSWORD>"
> Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-Compression = Van-Jacobson-TCP-IP,
> Framed-Routing = None,
> Framed-Netmask = 255.255.255.255,
> Ascend-Data-Filter = "ip in forward dstip <IP ADDRESS OF MAIL
> SERVER>/32 udp dstport =
> 53",
> Ascend-Data-Filter = "ip in forward dstip <IP ADDRESS OF MAIL
> SERVER>/32 udp dstport =
> 53",
> Ascend-Data-Filter = "ip in forward tcp dstport = 25",
> Ascend-Data-Filter = "ip in forward tcp dstport = 110",
> Ascend-Idle-Limit = 300
>
>
>
>At 10:57 AM 22/05/2001 -0500, you wrote:
>>Is there a way to setup a group that only allows email traffic? I need
>>to create a group that users can be assigned to that can only be used to
>>get port 25 traffic.
>>
>>Can this be done?
>>
>>--Keith
>>
>>
>>===
>>Archive at http://www.open.com.au/archives/radiator/
>>Announcements on [EMAIL PROTECTED]
>>To unsubscribe, email '[EMAIL PROTECTED]' with
>>'unsubscribe radiator' in the body of the message.
>
>===
>Archive at http://www.open.com.au/archives/radiator/
>Announcements on [EMAIL PROTECTED]
>To unsubscribe, email '[EMAIL PROTECTED]' with
>'unsubscribe radiator' in the body of the message.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
