Hello everyone, I have the following in radius.cfg: AcctLogFileFormat \ %U \ %{NAS-IP-Address} \ %{NAS-Identifier} \ %{Acct-Status-Type} \ %{Acct-Session-Id} \ %{Acct-Delay-Time} \ %{Acct-Authentic} \ %{Service-Type} \ %{NAS-Port-Type} \ %{NAS-Port} \ %{USR-Modem-Training-Time} \ %{USR-Interface-Index} \ %{Chassis-Call-Slot} \ %{Chassis-Call-Span} \ %{Chassis-Call-Channel} \ %{Unauthenticated-Time} \ %{Calling-Station-Id} \ %{Called-Station-Id} \ %{VPN-ID} \ %{Modulation-Type} \ %{Simplified-MNP-Levels} \ %{Simplified-V42bis-Usage} \ %{Connect-Speed} \ %{Framed-Protocol} \ %{Framed-IP-Address} \ %{VTS-Session-Key} \ %{Call-Arrived-time} \ %{Timestamp}
I tested with: radpwtst -trace -s www.prw.net -user [EMAIL PROTECTED] -password somepassword -auth_port 1812 -acct_port 1813 -secret somesecret -dictionary /etc/raddb/dictionary.prw And I get the following in the accounting detail file: Thu Nov 1 17:39:17 2001 User-Name = "[EMAIL PROTECTED]" Service-Type = Framed-User NAS-IP-Address = 203.63.154.1 NAS-Port = 1234 NAS-Port-Type = Async Acct-Session-Id = "00001234" Acct-Status-Type = Start Timestamp = 1004650757 cummins-pr.com 203.63.154.1 Stop 00001234 0 Framed-User Async 1234 1004650762 The desired change in the accounting detail file was to simply output the User-Name without the domain, i.e., User-Name = "cummins-pr.com". Where did I go wrong? Thanks in advance, William === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.