*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello there:
I been working in an ipchains rule set to allow radius clients to access radius server (Radiator) that is behind the FW. I did this: allow from any 1024:65535 to radius.server 1645 bidirectional proto udp allow from any 1024:65535 to radius.server 1646 bidirectional proto udp Here I have 2 kinds of RASes. One is a Hiper-ARC based one and the other is a Patton. The weird thing is patton doesn't send authentication or accounting packets above 1024 port, it does from 513 causing users not to get connected. So, I tailored that into my rule set like this allow from any 513 to radius.server 1645 bidirectional proto udp allow from any 513 to radius.server 1646 bidirectional proto udp But, I'm still having problems. When I applied the rule set, the patton cease to authenticate users again. Any body knows what should be the problem?. Is patton using any other port to connect to Radius server?. Or is radius server using another port different from 1645:1646? Thanks in advance Sergio Alejandro Gonzalez Director Operativo SkyNet de Colombia. Bogota, Colombia, South America. 57 (+1) 6 422 020 57 (+3) 7 285 094 === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.