Hi, I didn't find correct answer in list.. please, I would like to save to AcctLogFileName "cisco-avpair = "nas-rx-speed=28800"" - the number "28800" but I don know what I have to write to conf. file,
Thanks for any answer David . . <Realm DEFAULT> <AuthBy RADIUS> Secret xxxxxxx <Host 172.26.1.11> AuthPort 1812 AcctPort 1813 </Host> <Host 172.26.2.12> AuthPort 1812 AcctPort 1813 </Host> </AuthBy> AcctLogFileName %L/default%Y-%v-%d AcctLogFileFormat %{User-Name} %o %{Timestamp} %{Acct-Status-Type} %{Acct-Delay-Time} \ %{Acct-Input-Octets} %{Acct-Output-Octets} %{Acct-Session-Id} \ %{Acct-Session-Time} %{Acct-Terminate-Cause} %{NAS-IP-Address} \ %{NAS-Port} %{Framed-IP-Address} "what I have to write here for save "cisco-avpair nas-rx-speed???" </Realm> #--------trace 4 ------------DEBUG----------------- Code: Accounting-Request Identifier: 2 Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0> Attributes: NAS-IP-Address = 172.26.2.155 NAS-Port = 5 Cisco-NAS-Port = "Async5*Serial0:8" NAS-Port-Type = Async User-Name = "user1@userdomain" Called-Station-Id = "713" Acct-Status-Type = Stop Acct-Authentic = RADIUS Service-Type = Framed-User Acct-Session-Id = "00000044" Framed-Protocol = PPP Framed-IP-Address = 172.26.3.2 Acct-Terminate-Cause = User-Request Acct-Input-Octets = 2219 Acct-Output-Octets = 102 Acct-Input-Packets = 29 Acct-Output-Packets = 6 Acct-Session-Time = 15 cisco-avpair = "disc-cause-ext=1045" cisco-avpair = "pre-bytes-in=105" cisco-avpair = "pre-bytes-out=72" cisco-avpair = "pre-paks-in=4" cisco-avpair = "pre-paks-out=4" cisco-avpair = "pre-session-time=21" cisco-avpair = "connect-progress=60" cisco-avpair = "nas-rx-speed=28800" cisco-avpair = "nas-tx-speed=33600" Acct-Delay-Time = 0 Timestamp = 1006282052 === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.