Hello Eric -
The first problem shown is because there must be a space after DefaultReply: DefaultReply Service-Type=Framed-User, \ Framed-Protocol=PPP And the DictionaryFile line is normally put at the top of the configuration file with Foreground, LogStdout, etc. BTW - the AcctLogFileName line should be inside the Realm clause (it is probably this that is causing the error). I would suggest you read the RFC's and the Radiator reference manual, included in the distribution ("doc/rfc2865.txt", "doc/rfc2866.rfc" and "doc/ref.html"). I would also suggest you add some comments to the configuration file. regards Hugh On Thu, 13 Dec 2001 05:36, Eric Johnson wrote: > Sorry for sending this again but I switched addresses and can't remember > which one I subscribed to the listserve with. I am getting errors when I > try and start my service > that say unkown keywords. They are occuring on line > 62 and 71. Line 61 is > DefaultReplyService-Type=Framed-User,Framed-Protocol=PPP > and line 71 is DictionaryFile ./dictionary . I am > using the example provided in the goodies dir for my > NT auth. Would you guys take a look at my config file > and tell me what you think? Also any comments you > have about it in general would be more than > appreciated because I'm fairly new at this. > > Foreground > LogStdout > LogDir /Radiator/log > Trace 4 > > <Client DEFAULT> > Secret dogcat > DupInterval 0 > </Client> > > <AuthBy SQL> > > Identifier CheckSQL > > DBSource dbi:mysql:ISP > DBUsername admin > DBAuth > AccountingTable ACCOUNTING > AcctColumnDef USERNAME,User-Name > AcctColumnDef TIME_STAMP,Timestamp,integer > AcctColumnDef > ACCTSTATUSTYPE,Acct-Status-Type > AcctColumnDef > ACCTDELAYTIME,Acct-Delay-Time,integer > AcctColumnDef > ACCTINPUTOCTETS,Acct-Input-Octets,integer > AcctColumnDef > ACCTOUTPUTOCTETS,Acct-Output-Octets,integer > AcctColumnDef ACCTSESSIONID,Acct-Session-Id > > AcctColumnDef > ACCTSESSIONTIME,Acct-Session-Time,integer > AcctColumnDef > ACCTTERMINATECAUSE,Acct-Terminate-Cause > AcctColumnDef NASIDENTIFIER,NAS-Identifier > AcctColumnDef NASPORT,NAS-Port,integer > </AuthBy> > > > > <AuthBy NT> > > Identifier CheckNT > > # You must set the domain name here > to suit your site > Domain ETHERNET1 > > # ON NT, optionally specify the name > of the > # Primary Domain Controller, > including the leading > # \\ slashes, to override the default > domain controller > # for the domain you specified above > DomainController \\FEZZIK > > # On Unix, you MUST specify the > Domain Controller > # name as the NT host name of the > domain controller > # its not optional. This needs to be > set to the NT > # name of the Primary Domain > Controller, and further > # the NT name must be in the Unix > hosts or DNS > DomainController FEZZIK > > # On NT, you can optionally check the > > # "Grant dialin permission to user" > flag in the > # user manager. Requires the > # Win32-RasAdmin Perl package to be > installed first > # HonourDialinPermission > > # This will set up some standard > reply items for > # your NAS, you may need others for > your NAS > > DefaultReplyService-Type=Framed-User,Framed-Protocol=PPP > > </AuthBy> > > <Realm DEFAULT> > AuthByPolicy ContinueUntilAccept > AuthBy CheckNT > AuthBy CheckSQL > </Realm> > # Log accounting to the detail file in LogDir > > AcctLogFileName ./detail > #Dictionary File is in current dir > DictionaryFile ./dictionary -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.