Hello GwangHee -
On Fri, 14 Dec 2001 09:03, GwangHee Yi wrote: > Dear All, > > Would anyone tell me what configuration of CISCO send me an Access-Request > or show me configuration file? > CISCO do not send me an Access-Request > I am using CISCO AS5300 and IOS 12.1. > There is an item on this in the FAQ: <<<<<>>>>> 5. How do I configure a Cisco NAS for Radius? You will need something like this in your Terminal server configuration: aaa new-model aaa authentication login DIAL-SCRIPT-USERS radius aaa authentication login TELNET-USERS local aaa authentication ppp PAP-USERS if-needed radius aaa authorization network radius aaa accounting network start-stop radius ... radius-server host 1.2.3.4 auth-port 1645 acct-port 1646 radius-server key blahblahblah You will probably want to use these reply attributes in order to enable PPP sessions: Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Netmask = 255.255.255.0, Framed-Routing = None, Framed-MTU = 1500, Framed-Compression = Van-Jacobson-TCP-IP There is a description of Cisco's use of Radius attributes for IOS 12 in RADIUS Attributes overview. <<<<<>>>>> There has also been a great deal of discussion on this topic on the mailing list, so check the archive site (www.open.com.au/archives/radiator) and of course the best source of information is the Cisco web site. regards Hugh -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.