Hello again, Making some progress on this issue but have run into a problem. We are trying to assign IP static addresses via radius, and also have radius reference a dynamic IP pool on a cisco 7206vxr router. We have followed the advice given by cisco TAC and suggestions by Hugh here, but still quite haven't got it resolved.
We have the following configuration on our cisco: ! interface Virtual-Template1 ip unnumbered FastEthernet0/0 ip mtu 1492 no peer default ip address pool ppp authentication pap centurytel ! ip local pool centurytel 64.119.12.1 64.119.15.254 And this is a portion of our Radius "users" file for the cisco authenticated users. DEFAULT Client-Identifier = dsl, Auth-Type = System Service-Type = Framed-User, Framed-Protocol = PPP, Framed-Address = 255.255.255.254, Framed-Netmask = 255.255.255.0, Framed-Routing = None, Framed-Compression = Van-Jacobson-TCP-IP, Framed-MTU = 1500, cisco-avpair = "ip:addr-pool=centurytel" However when we implement this DSL users will not authenticate and receive an IP address. What are we missing here? - Mike ------------------------------------------------ Rock Island Communications, Inc. (360)-378-5884 http://www.rockisland.com/ San Juan Islands, WA ------------------------------------------------ === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.