Ok, I just deleted the Framed-IP-Address = 255.255.255.254 from each record and the is still show connecting. Here is the Trace 4, config file and an example user entry.
Wed Feb 20 18:06:41 2002: INFO: Duplicate request id 146 received from 65.162.142.7(1029): ignored Wed Feb 20 18:07:21 2002: DEBUG: Packet dump: *** Received from 65.162.142.7 port 1029 .... Code: Access-Request Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: User-Name = "franstrand" Password = "<239>|<243>B<194>Q<206><196>?<184>x<17><137>C<162><18>" NAS-IP-Address = 65.162.142.7 NAS-Port = 24 NAS-Port-Type = Async Service-Type = Framed-User Framed-Protocol = PPP Connect-Info = "24000 LAPM/V42BIS" Wed Feb 20 18:07:21 2002: DEBUG: Handling request with Handler 'Realm=DEFAULT' Wed Feb 20 18:07:21 2002: DEBUG: Deleting session for franstrand, 65.162.142.7, 24 Wed Feb 20 18:07:21 2002: DEBUG: Handling with Radius::AuthFILE: Wed Feb 20 18:07:21 2002: DEBUG: Radius::AuthFILE looks for match with franstrand Wed Feb 20 18:07:21 2002: DEBUG: Radius::AuthFILE ACCEPT: Wed Feb 20 18:07:21 2002: DEBUG: Access accepted for franstrand Wed Feb 20 18:07:21 2002: DEBUG: Packet dump: *** Sending to 65.162.142.7 port 1029 .... Code: Access-Accept Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Netmask = 255.255.255.0 Framed-Routing = Broadcast-Listen Framed-Compression = Van-Jacobson-TCP-IP Framed-MTU = 1500 Idle-Timeout = 900 Wed Feb 20 18:07:24 2002: DEBUG: Packet dump: *** Received from 65.162.142.7 port 1029 .... Code: Access-Request Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: User-Name = "franstrand" Password = "<239>|<243>B<194>Q<206><196>?<184>x<17><137>C<162><18>" NAS-IP-Address = 65.162.142.7 NAS-Port = 24 NAS-Port-Type = Async Service-Type = Framed-User Framed-Protocol = PPP Connect-Info = "24000 LAPM/V42BIS" Wed Feb 20 18:07:24 2002: DEBUG: Handling request with Handler 'Realm=DEFAULT' Wed Feb 20 18:07:24 2002: DEBUG: Deleting session for franstrand, 65.162.142.7, 24 Wed Feb 20 18:07:24 2002: DEBUG: Handling with Radius::AuthFILE: Wed Feb 20 18:07:24 2002: DEBUG: Radius::AuthFILE looks for match with franstrand Wed Feb 20 18:07:24 2002: DEBUG: Radius::AuthFILE ACCEPT: Wed Feb 20 18:07:24 2002: DEBUG: Access accepted for franstrand Wed Feb 20 18:07:24 2002: DEBUG: Packet dump: *** Sending to 65.162.142.7 port 1029 .... Code: Access-Accept Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Netmask = 255.255.255.0 Framed-Routing = Broadcast-Listen Framed-Compression = Van-Jacobson-TCP-IP Framed-MTU = 1500 Idle-Timeout = 900 Wed Feb 20 18:07:27 2002: DEBUG: Packet dump: *** Received from 65.162.142.7 port 1029 .... Code: Access-Request Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: User-Name = "franstrand" Password = "<239>|<243>B<194>Q<206><196>?<184>x<17><137>C<162><18>" NAS-IP-Address = 65.162.142.7 NAS-Port = 24 NAS-Port-Type = Async Service-Type = Framed-User Framed-Protocol = PPP Connect-Info = "24000 LAPM/V42BIS" Wed Feb 20 18:07:27 2002: DEBUG: Handling request with Handler 'Realm=DEFAULT' Wed Feb 20 18:07:27 2002: DEBUG: Deleting session for franstrand, 65.162.142.7, 24 Wed Feb 20 18:07:27 2002: DEBUG: Handling with Radius::AuthFILE: Wed Feb 20 18:07:27 2002: DEBUG: Radius::AuthFILE looks for match with franstrand Wed Feb 20 18:07:27 2002: DEBUG: Radius::AuthFILE ACCEPT: Wed Feb 20 18:07:27 2002: DEBUG: Access accepted for franstrand Wed Feb 20 18:07:27 2002: DEBUG: Packet dump: *** Sending to 65.162.142.7 port 1029 .... Code: Access-Accept Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Netmask = 255.255.255.0 Framed-Routing = Broadcast-Listen Framed-Compression = Van-Jacobson-TCP-IP Framed-MTU = 1500 Idle-Timeout = 900 Wed Feb 20 18:07:30 2002: DEBUG: Packet dump: *** Received from 65.162.142.7 port 1029 .... Code: Access-Request Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: User-Name = "franstrand" Password = "<239>|<243>B<194>Q<206><196>?<184>x<17><137>C<162><18>" NAS-IP-Address = 65.162.142.7 NAS-Port = 24 NAS-Port-Type = Async Service-Type = Framed-User Framed-Protocol = PPP Connect-Info = "24000 LAPM/V42BIS" Wed Feb 20 18:07:30 2002: DEBUG: Handling request with Handler 'Realm=DEFAULT' Wed Feb 20 18:07:30 2002: DEBUG: Deleting session for franstrand, 65.162.142.7, 24 Wed Feb 20 18:07:30 2002: DEBUG: Handling with Radius::AuthFILE: Wed Feb 20 18:07:30 2002: DEBUG: Radius::AuthFILE looks for match with franstrand Wed Feb 20 18:07:30 2002: DEBUG: Radius::AuthFILE ACCEPT: Wed Feb 20 18:07:30 2002: DEBUG: Access accepted for franstrand Wed Feb 20 18:07:30 2002: DEBUG: Packet dump: *** Sending to 65.162.142.7 port 1029 .... Code: Access-Accept Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Netmask = 255.255.255.0 Framed-Routing = Broadcast-Listen Framed-Compression = Van-Jacobson-TCP-IP Framed-MTU = 1500 Idle-Timeout = 900 Wed Feb 20 18:07:33 2002: DEBUG: Packet dump: *** Received from 65.162.142.7 port 1029 .... Code: Access-Request Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: User-Name = "franstrand" Password = "<239>|<243>B<194>Q<206><196>?<184>x<17><137>C<162><18>" NAS-IP-Address = 65.162.142.7 NAS-Port = 24 NAS-Port-Type = Async Service-Type = Framed-User Framed-Protocol = PPP Connect-Info = "24000 LAPM/V42BIS" Wed Feb 20 18:07:33 2002: DEBUG: Handling request with Handler 'Realm=DEFAULT' Wed Feb 20 18:07:33 2002: DEBUG: Deleting session for franstrand, 65.162.142.7, 24 Wed Feb 20 18:07:33 2002: DEBUG: Handling with Radius::AuthFILE: Wed Feb 20 18:07:33 2002: DEBUG: Radius::AuthFILE looks for match with franstrand Wed Feb 20 18:07:33 2002: DEBUG: Radius::AuthFILE ACCEPT: Wed Feb 20 18:07:33 2002: DEBUG: Access accepted for franstrand Wed Feb 20 18:07:33 2002: DEBUG: Packet dump: *** Sending to 65.162.142.7 port 1029 .... Code: Access-Accept Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Netmask = 255.255.255.0 Framed-Routing = Broadcast-Listen Framed-Compression = Van-Jacobson-TCP-IP Framed-MTU = 1500 Idle-Timeout = 900 Wed Feb 20 18:07:36 2002: DEBUG: Packet dump: *** Received from 65.162.142.7 port 1029 .... Code: Access-Request Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: User-Name = "franstrand" Password = "<239>|<243>B<194>Q<206><196>?<184>x<17><137>C<162><18>" NAS-IP-Address = 65.162.142.7 NAS-Port = 24 NAS-Port-Type = Async Service-Type = Framed-User Framed-Protocol = PPP Connect-Info = "24000 LAPM/V42BIS" Wed Feb 20 18:07:36 2002: DEBUG: Handling request with Handler 'Realm=DEFAULT' Wed Feb 20 18:07:36 2002: DEBUG: Deleting session for franstrand, 65.162.142.7, 24 Wed Feb 20 18:07:36 2002: DEBUG: Handling with Radius::AuthFILE: Wed Feb 20 18:07:36 2002: DEBUG: Radius::AuthFILE looks for match with franstrand Wed Feb 20 18:07:36 2002: DEBUG: Radius::AuthFILE ACCEPT: Wed Feb 20 18:07:36 2002: DEBUG: Access accepted for franstrand Wed Feb 20 18:07:36 2002: DEBUG: Packet dump: *** Sending to 65.162.142.7 port 1029 .... Code: Access-Accept Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Netmask = 255.255.255.0 Framed-Routing = Broadcast-Listen Framed-Compression = Van-Jacobson-TCP-IP Framed-MTU = 1500 Idle-Timeout = 900 Wed Feb 20 18:07:39 2002: DEBUG: Packet dump: *** Received from 65.162.142.7 port 1029 .... Code: Access-Request Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: User-Name = "franstrand" Password = "<239>|<243>B<194>Q<206><196>?<184>x<17><137>C<162><18>" NAS-IP-Address = 65.162.142.7 NAS-Port = 24 NAS-Port-Type = Async Service-Type = Framed-User Framed-Protocol = PPP Connect-Info = "24000 LAPM/V42BIS" Wed Feb 20 18:07:39 2002: DEBUG: Handling request with Handler 'Realm=DEFAULT' Wed Feb 20 18:07:39 2002: DEBUG: Deleting session for franstrand, 65.162.142.7, 24 Wed Feb 20 18:07:39 2002: DEBUG: Handling with Radius::AuthFILE: Wed Feb 20 18:07:39 2002: DEBUG: Radius::AuthFILE looks for match with franstrand Wed Feb 20 18:07:39 2002: DEBUG: Radius::AuthFILE ACCEPT: Wed Feb 20 18:07:39 2002: DEBUG: Access accepted for franstrand Wed Feb 20 18:07:39 2002: DEBUG: Packet dump: *** Sending to 65.162.142.7 port 1029 .... Code: Access-Accept Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Netmask = 255.255.255.0 Framed-Routing = Broadcast-Listen Framed-Compression = Van-Jacobson-TCP-IP Framed-MTU = 1500 Idle-Timeout = 900 Wed Feb 20 18:07:42 2002: DEBUG: Packet dump: *** Received from 65.162.142.7 port 1029 .... Code: Access-Request Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: User-Name = "franstrand" Password = "<239>|<243>B<194>Q<206><196>?<184>x<17><137>C<162><18>" NAS-IP-Address = 65.162.142.7 NAS-Port = 24 NAS-Port-Type = Async Service-Type = Framed-User Framed-Protocol = PPP Connect-Info = "24000 LAPM/V42BIS" Wed Feb 20 18:07:42 2002: DEBUG: Handling request with Handler 'Realm=DEFAULT' Wed Feb 20 18:07:42 2002: DEBUG: Deleting session for franstrand, 65.162.142.7, 24 Wed Feb 20 18:07:42 2002: DEBUG: Handling with Radius::AuthFILE: Wed Feb 20 18:07:42 2002: DEBUG: Radius::AuthFILE looks for match with franstrand Wed Feb 20 18:07:42 2002: DEBUG: Radius::AuthFILE ACCEPT: Wed Feb 20 18:07:42 2002: DEBUG: Access accepted for franstrand Wed Feb 20 18:07:42 2002: DEBUG: Packet dump: *** Sending to 65.162.142.7 port 1029 .... Code: Access-Accept Identifier: 147 Authentic: <169>[<232><223><179><232><162>K<147><177>)~<220>6#<24> Attributes: Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Netmask = 255.255.255.0 Framed-Routing = Broadcast-Listen Framed-Compression = Van-Jacobson-TCP-IP Framed-MTU = 1500 Idle-Timeout = 900 # livingCompat.cfg # # This is a simple Radiator config file that allows you # to continue using a bog standard Livingston or # similar users file with Radiator, It implements the # Auth-Type="System" check item by using AuthBy UNIX # # You will probably want to change the definitions of # DbDir, LogDir and the Filename parameters # # Author: Mike McCauley ([EMAIL PROTECTED]) # Copyright (C) 1997 Open System Consultants # $Id: livingCompat.cfg,v 1.3 1999/07/12 02:01:35 mikem Exp $ Foreground LogStdout Trace 4 DbDir c:\winnt\system32\drivers\etc\raddb LogDir c:\usr\adm\radacct\65.162.142.7 # This clause defines a single client to listen to # You will probably want to change localhost and mysecret # to suit your site. <Client www.xxx.yyy.zzz> Secret </Client> <Client www.xxx.yyy.zzz> Secret </Client> <Client localhost> Secret </Client> <Client www.xxx.yyy.zzz> Secret </Client> # This clause means we will handle any real that arrives <Realm DEFAULT> <AuthBy FILE> Filename %D\users </AuthBy> # Log accounting to the detail file in LogDir AcctLogFileName %L\detail </Realm> # This clause defines an authorisation method that will be used # by any users in the database with Auth-Type="System". It will # match the "Identifier System" #<AuthBy UNIX> # Identifier System # Filename ./passwd #</AuthBy> user Password = "password" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Netmask = 255.255.255.0, Framed-Routing = Broadcast-Listen, Framed-Compression = Van-Jacobson-TCP-IP, Framed-MTU = 1500, Idle-Timeout = 900 ----- Original Message ----- From: "Hugh Irvine" <[EMAIL PROTECTED]> To: "David Hayes-Moats" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Tuesday, February 19, 2002 6:58 PM Subject: Re: (RADIATOR) Radiator and Livingston PM3 > > Hello David - > > On Wed, 20 Feb 2002 07:03, David Hayes-Moats wrote: > > I'm in the process of switching my radius servers from the Livingston > > supplied server to Radiator. I'm using the same flat file that I did > > before. I tried using the same dictionary and the dictionary.livingston > > and Radiator said that they were missing Attributes, so I decided to use > > the plain dictionary file that came with Radiator. > > > > Now the problem that I have is that if I tell the PM3 to use this radius > > server for authentication, the username and password is received checked > > and authenticated but the PM3 doesn't not allow the user to connect. I can > > successfully use the radpwtst with a username and password and it passed. > > Any help would be appreciated. > > > > This is probably a problem with reply attributes. > > Could you please send me a copy of your configuration file (no secrets) > together with a trace 4 debug from Radiator showing what is happening. > > thanks > > Hugh > > -- > Radiator: the most portable, flexible and configurable RADIUS server > anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. > - > Nets: internetwork inventory and management - graphical, extensible, > flexible with hardware, software, platform and database independence. > === > Archive at http://www.open.com.au/archives/radiator/ > Announcements on [EMAIL PROTECTED] > To unsubscribe, email '[EMAIL PROTECTED]' with > 'unsubscribe radiator' in the body of the message. === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
