Hello Marcel -
Thanks for sending the debug. It appears that you are sending the radius accounting to 202.65.68.8:1646 and the authentication to 202.65.68.8:1645. There is a response from the radius server in both cases. Could you please send me a copy of your configuration file (no secrets) together with a trace 4 debug from Radiator showing what is happening. thanks Hugh On Mon, 11 Mar 2002 17:02, Marcel Welschbillig wrote: > Hugh, > > Thanks for the reply. I have attached the config and debug info, i have > looked at this for many days and found nothing obvious (my knowlege on > radius is limited) and tried many different things and come to no > conclusion. If you can see anything wrong please let me know. Also i > have removed all filters and access lists on the routers between here > and there and had no luck. > > Regards, > > Marcel > > Hugh Irvine wrote: > > Hello Marcel - > > > > It sounds like the 2611 is not configured correctly for radius > > accounting. > > > > You should do a debug on the 2611 to see what it is doing. You might also > > check your access lists and filters, as the accounting port number is > > different from the authentication port (1645/1812 and 1646/1813). > > > > regards > > > > Hugh > > > > On Mon, 11 Mar 2002 16:31, Marcel Welschbillig wrote: > >> Hi, > >> > >> Was hopping someone can shed some light on our problem, the story goes > >> like this..... > >> > >> We are running radiator with platypus billing system and things are > >> working fine on our local ISP system. We recently got into the satellite > >> telecommunications business and decided to put a 2611 router out on a > >> remote site with an 8AM analog modem module to provide access to the > >> data stream and authenticate via radiator/platypus. The data stream is > >> via VSAT satellite equipment ( Basicly a serial at both routers with > >> VSAT equipment between, using HDSL Encapsulation, introduces about 700ms > >> delay round trip ) > >> > >> The strange thing is that i can seem to authenticate from the remote > >> 2611 but there is no call/download information sent back. The radius > >> server and platypus server are local and work fine with our other access > >> servers. Why can it authenticate over the SAT link but not send the > >> billing data back ?? I know the radius server and platypus server are > >> configured correctly because they are accounting for our loacl dialin > >> customers, the router is configured nearly identical to our access > >> servers with regards to CISCO aaa. > >> > >> Any help would be great, i have tried just about everything and dont > >> know where to go next. -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
