> > Hello Michael - > > If your DSL users are going to be authenticated from a > different realm, > then what you describe will work fine. > > Otherwise you could use Handlers, or you could use > Identifiers in your > Client clauses and use the Client-Identifier as the PoolHint for the > AuthBy DYNADDRESS. > > This topic has been discussed on the mailing list, so check the > archives. > > www.open.com.au/archives/radiator >
For anyone that is setting up DSL Auth. On Radiator, sitting behind a Cisco LNS - You must have the following: ! interface Virtual-Template1 description Connect L2TP termination ip unnumbered <gateway interface for DSL users> <--- Important! ip policy route-map unlimited-traffic ppp authentication pap chap callin ppp authorization l2tp ppp accounting l2tp ! I originally had 'no ip address' which did not work: ! interface Virtual-Template1 description Connect L2TP termination no ip address ppp authentication pap chap callin ppp authorization l2tp ppp accounting l2tp ! Hope this helps someone. Regards, MB > regards > > Hugh > > > On Thursday, Jun 26, 2003, at 13:50 Australia/Melbourne, Michael > Bellears wrote: > > > Client of ours is running Radmin-1.7, Radiator 3.5 for > dialup clients > > (Modem+ISDN). > > > > They want to now also Authenticate for DSL users - NAS will > be a Cisco > > 7200. > > > > I have added a new Client (Via Radmin), with a NAS Type of > CiscoVPDN. > > > > Would I need to add a new realm to the config with <AuthBy > RADMIN> and > > also containing an <AuthBy DYNADDRESS> to allocate a > different pool(To > > the modem dialup users) of dynamic adddresses? > > > > Has anyone setup something similar to the above that would like to > > share > > there experiences? > > > > Thanks in advance. > > > > Regards, > > MB > > > > > > > > > > === > > Archive at http://www.open.com.au/archives/radiator/ > > Announcements on [EMAIL PROTECTED] > > To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe > > radiator' in the body of the message. > > > > > > NB: have you included a copy of your configuration file (no > secrets), together with a trace 4 debug showing what is happening? > > -- > Radiator: the most portable, flexible and configurable RADIUS > server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, > NT, MacOS X. > - > Nets: internetwork inventory and management - graphical, > extensible, flexible with hardware, software, platform and > database independence. > > === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
