Hey guys I can't update my sessions table cause it gets an error since there
is no NAS-Port present in stop and start records....can anyone give me an
idea if there is a command on Cisco VDPN LNS L2TP to get it to send over
NAS-Port info?
Thanks,
Craig.
Wed Sep 3 16:26:07 2003: DEBUG: Packet dump:
*** Received from 205.214.223.130 port 21738 ....
Code: Accounting-Request
Identifier: 151
Authentic: z%<218><4><131><142><140><3>t0<186>j<220>x<178>y
Attributes:
Acct-Session-Id = "00003DBF"
Tunnel-Server-Endpoint = 192.168.255.20
Tunnel-Client-Endpoint = 10.193.5.9
Tunnel-Assignment-ID = 1
Tunnel-Type = 0:L2TP
Tunnel-ID = 238499
Tunnel-Client-Auth-ID = sunbeachrout
Tunnel-Server-Auth-ID = lnsbios3
Framed-Protocol = PPP
Framed-IP-Address = 66.205.14.199
Acct-Authentic = RADIUS
Acct-Session-Time = 8318
Acct-Input-Octets = 1170527
Acct-Output-Octets = 26796558
Acct-Input-Packets = 39652
Acct-Output-Packets = 50692
Acct-Terminate-Cause = User-Request
User-Name = "uuuuu"
Acct-Status-Type = Stop
NAS-Port-Type = Async
Calling-Station-Id = "2464235849"
Called-Station-Id = "2929700"
Service-Type = Framed-User
NAS-IP-Address = 205.214.223.130
Acct-Delay-Time = 0
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
