(RADIATOR) radiusd crashes/dies

Mon, 27 Oct 2003 14:21:47 -0800

Hello,

On June 1st we upgraded to the 3.6-1 version of Radiator. (New box with RH and added SQL logging)

The box has been running flawlessly up until 1 1/2 weeks ago.

Radiusd just stops and is not listed in "top" or "ps". We can restart the service and it will run fine for about 2 or 3 days and then die again.

The log files do not show anything out of the ordinary and I am currently running debug, hoping to catching it when it dies.

Any suggestions or hints on what could be causing this and solutions would be appreciated!

I am also looking into restartWrapper as well as contemplating replacing RH with FreeBSD. Any thoughts / suggestions on restartWrapper and/or migrating to FreeBSD are welcome and appreciated!

Below is a copy of the current radius.cfg (no secrets)

Thank you!

bwc

~~~start radius.cfg~~~~
LogDir          /usr/local/radius/log
DbDir           /usr/local/etc/raddb
# Use a low trace level in production systems. Increase
# it to 4 or 5 for debugging, or use the -trace flag to radiusd
Trace   4
AuthPort 1645
AcctPort 1646

# Permits only alphanumeric, period, dash, underscore and the (at) sign in the username.
UsernameCharset [EMAIL PROTECTED]
# Strip realm and domain i.e, making life easier for our customers
RewriteUsername s/^.*\\|@.*$|^\s+|\s+$//g
RewriteUsername s/%//g

# You will probably want to add other Clients to suit your site,
# one for each NAS you want to work with
<Client localhost>
        Secret  XXXXXXX
        DupInterval 0
</Client>

# All of the [town "a"] PM3s are listed here
<Client aax.xxxxx.net>
        Secret xxxxxxxxxxx

        IdenticalClients bax.xxxxx.net cax.xxxxx.net \
        dax.xxxxx.net eax.xxxxx.net fax.xxxxx.net \
        gax.xxxxx.net hax.xxxxx.net iax.xxxxx.net \
        jax.xxxxx.net kax.xxxxx.net lax.xxxxx.net \
        max.xxxxx.net nax.xxxxx.net nax.xxxxx.net
</Client>

# All of the [town "b"] PM3s are listed here
<Client abx.xxxxx.net>
        Secret xxxxxxxxxxx

        IdenticalClients bbx.xxxxx.net cbx.xxxxx.net \
        dbx.xxxxx.net ebx.xxxxx.net fbx.xxxxx.net \
        gbx.xxxxx.net
</Client>

# All of the [town "c"] PM3s are listed here
<Client acx.xxxxx.net>
        Secret xxxxxxxxxxxx

        IdenticalClients bcx.xxxxx.net ccx.xxxxx.net \
        dcx.xxxxx.net
</Client>

# All of the [town "d"] PM3s are listed here
<Client adx.xxxxx.net>
        Secret xxxxxxxxxxx

        IdenticalClients bdx.xxxxx.net cdx.xxxxx.net \
        ddx.xxxxx.net edx.xxxxx.net
</Client>

# All of the [town "e"] HiperARCs are listed here
<Client aaa.bbb.ccc.aaa>
        Secret xxxxxxxxxxx
        IgnoreAcctSignature

        IdenticalClients  aaa.bbb.ccc.bbb aaa.bbb.ccc.ccc aaa.bbb.ccc.ddd
</Client>

# All of the misc. devices are listed here
<Client afx.xxxxx.net>
        Secret xxxxxxxxxxxx
</Client>

# WiFi Gateway/AccessPoint
<Client aaa.bbb.ccc.eee>
        Secret xxxxxxxxxxx
</Client>

<AuthBy SQL>
        Identifier      SQLAccounting
        DBSource        dbi:Pg:dbname=[databasename];host=zzz.yyy.xxx.www
        DBUsername      XXXXXXXXXXX
        DBAuth  xxxxxxxxxxxxx

# Just accounting, no auth

        IgnoreAuthentication
        AuthSelect

        AccountingTable RadiatorAccounting
        AcctColumnDef   USERNAME,User-Name
        AcctColumnDef   TIME_STAMP,Timestamp,integer
        AcctColumnDef   ACCTSTATUSTYPE,Acct-Status-Type
        AcctColumnDef   ACCTDELAYTIME,Acct-Delay-Time,integer
        AcctColumnDef   ACCTINPUTOCTETS,Acct-Input-Octets,integer
        AcctColumnDef   ACCTOUTPUTOCTETS,Acct-Output-Octets,integer
        AcctColumnDef   ACCTSESSIONID,Acct-Session-Id
        AcctColumnDef   ACCTSESSIONTIME,Acct-Session-Time,integer
        AcctColumnDef   ACCTTERMINATECAUSE,Acct-Terminate-Cause
        AcctColumnDef   NASIDENTIFIER,NAS-IP-Address
        AcctColumnDef   NASPORT,NAS-Port,integer
        AcctColumnDef   NASPORTTYPE,NAS-Port-Type
        AcctColumnDef   FRAMEDIPADDRESS,Framed-IP-Address
        AcctColumnDef   CALLEDSTATIONID,Called-Station-Id
        AcctColumnDef   CALLINGSTATIONID,Calling-Station-Id

</AuthBy>

<AuthBy FILE>
        Identifier      CheckFile
        Filename        %D/users
</AuthBy>

<AuthBy GROUP>
        Identifier CheckUser
        AuthByPolicy ContinueUntilAccept
        AuthBy CheckFile
        AddToReplyIfNotExist Framed-Filter = "serial"
</AuthBy>

<Realm DEFAULT>
        AuthByPolicy ContinueAlways
        AuthBy SQLAccounting
        AuthBy CheckUser

        # Log accounting to a detail file
        AcctLogFileName %L/cd-%Y%m%d
</Realm>

<SessionDatabase DBM>
# The name of the DBM file. Defaults on %D/online
Filename %D/online
</SessionDatabase>
~~~stop radius.cfg~~~ 


===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.

Reply via email to