On 28 Jan 2011, at 02:30, Michael wrote: > > I give up. I've searched for hours for a hint at what this CoA / > Change-of-Authorization / Change-Filter-Request is. I think it is what > i'm looking for. > > I was kinda hoping something like this would work: > -code Change-Filter-Request User-Name="test" cisco-Policy-Down="rate1M" > or: > code Change-Filter-Request Acct-Session-Id="00000012" > cisco-Policy-Down="rate1M" > > My Disconnect-Request process works fine which uses a similar process. > > > Michael
Hi I had the same problem and eventually got it working using the following /usr/local/bin/radpwtst -noauth -noacct -code Change-Filter-Request -secret XXXXXXXX -s $nas-ip -auth_port 1700 Framed-IP-Address=$ip cisco-avpair="ip:sub-qos-policy-out=$policy" that worked but i had scaling issues, only solved when i moved the traffic management to Cisco SCE devices. -- Steve Lalonde RTFM Chief Technical Officer Entanet International Ltd http://www.enta.net/ _______________________________________________ radiator mailing list [email protected] http://www.open.com.au/mailman/listinfo/radiator
