I am trying to evaluate the Radiator Application. I have installed ActivePerl
and modules and Radiator and so far according to the documentation I have read.
I am now trying to understand how I can utilize the RADIUS Server. The
equipment I will be logging into thru the RADIUS Server will require the user
to enter a "Username" and "Password" which is passed to the server (sample of
output to Server from REDCOM below). When Radiator receives the request, we
want the server to be set up to identify the REDCOM system (would like to setup
REDCOM with a Vendor ID = 32167 and a Attribute labeled Redcom-User-Class which
would send a string back to our system (Capture shown below). I am trying to
use the HTTP GUI interface and I think I would have to customize the REALM
section but not sure how and if a flat file is required how to set this up. I
have a connection with the server from our equipment, it is just a matter of
getting the proper response back. Would appreciate any assista
nce.
Plus any info on setting up the RADSEC also but want to understand how to
customize the server to my needs. Thanks
FROM REDCOM to SERVER:
Radius Protocol
Code: Access-Request (1)
Packet identifier: 0xd (13)
Length: 66
Authenticator: 6362808e9710451697889a204d1af7db Attribute Value Pairs
AVP: l=7 t=User-Name(1): root
AVP: l=18 t=User-Password(2): Decrypted:
"pokey\000\000\000\000\000\000\000\000\000\000\000"
AVP: l=15 t=NAS-Identifier(32): redcom switch
AVP: l=6 t=NAS-Port(5): 4
FROM SERVER to REDCOM:
Radius Protocol
Code: Access-Accept (2)
Packet identifier: 0xd (13)
Length: 67
Authenticator: e5da6909de553531aa74ebde05e1d446 Attribute Value Pairs
Attribute Value Pairs
AVP: l=12 t=Vendor-Specific(26) v=REDCOM Laboratories, Inc(32167)
VSA: l=6 t=Unknown-Attribute(1): string
Steven Saverino
Integration Lab
One Redcom Center
Victor, New York
Phone: (585) 924-7550
Extension: 455
E-mail: [email protected]
_______________________________________________
radiator mailing list
[email protected]
http://www.open.com.au/mailman/listinfo/radiator
