Sorry, That is the only change I make. The server IP matches BindAddress IP. See following ipconfig output.
C:\Perl\bin>ipconfig Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IPv4 Address. . . . . . . . . . . : 144.211.2.97 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 144.211.2.248 I also notice radiusd is listening to the port 1812 and 1813. C:\Program Files\Radiator>netstat -an | grep 18 UDP 0.0.0.0:57183 *:* UDP 127.0.0.1:57185 *:* UDP 144.211.2.97:1812 *:* UDP [::]:57184 *:* C:\Program Files\Radiator> For some unknown reason, radpwtst cannot connect to radiusd. From: Alan Buxey [mailto:[email protected]] Sent: Tuesday, November 06, 2012 12:15 PM To: Qiu, Dennis; [email protected] Subject: Re: [RADIATOR] Radiator does not wait for RADIUS requests Without ANY changes? Unless your server has the IP address that's the same as the config file you used...then that won't work. The default config is a starting point , a basic block to build/construct from. alan
_______________________________________________ radiator mailing list [email protected] http://www.open.com.au/mailman/listinfo/radiator
