On 02/07/2013 01:54 PM, Thomas Kurian wrote:
> Can you check the configuration below and advice me.
Hello Thomas,
Trace 4 log should tell how (which Handlers and AuthBys) process the
requests and which SQL queries are run.
But the first thing you should do is to reorganise your configuration file:
1. Use just Handlers
2. Handlers can not be inside Realms
3. Order the Handlers correctly: first matching Handler is selected
Maybe something like this:
# Global options
# <Client ...> clauses
<Handler Acct-Status-Type = Stop>
# Config to handle just the Stops
</Handler>
<Handler Request-Type = Accounting-Request>
# Maybe the contents of <Realm DEFAULT> from below go here?
</Handler>
I think part of the problem is the requests are not processed by
Handlers and AuthBys as you are planning. The configuration
reorganisation should help with that.
Thanks,
Heikki
>
> # radius.cfg
>
>
> #Foreground
> #LogStdout
>
> AcctPort 1813
> AuthPort 1812
>
> BindAddress 0.0.0.0
>
>
> LogDir /var/log/radius
> DbDir /etc/radiator
> # Use a low trace level in production systems. Increase
> # it to 4 or 5 for debugging, or use the -trace flag to radiusd
> Trace 4
>
> # You will probably want to add other Clients to suit your work site,
> # one for each NAS you want to work with
>
>
> <Client DEFAULT>
> Secret xxxxxxxx
> DupInterval 0
> </Client>
>
> #<Client 94.187.135.175>
> # Secret ciscowimd85
> # DupInterval 0
> # NasType Cisco
> #</Client>
>
> #<Client 94.187.135.222>
> # Secret xxxxxxxx
> # DupInterval 0
> # NasType Cisco
> #</Client>
>
> <Client 10.50.1.4>
> Secret xxxxxxxx
> DupInterval 0
> NasType Cisco
> IgnoreAcctSignature
> </Client>
>
> <Realm DEFAULT>
> <AuthBy SQL>
>
> DBSource dbi:mysql:radius
> DBUsername xxxxxxxx
> DBAuth xxxxxxxx
>
>
>
> AccountingTable ACCOUNTING
> AcctColumnDef USERNAME, User-Name
> AcctColumnDef ACCTSTATUSTYPE,Acct-Status-Type
> AcctColumnDef FRAMEDIPADDRESS,Framed-IP-Address
> AcctColumnDef ACCTINPUTOCTETS,Acct-Input-Octets
> AcctColumnDef ACCTOUTPUTOCTETS,Acct-Output-Octets
> AcctColumnDef TIME_STAMP,Event-Timestamp
> AcctColumnDef ACCTSESSIONTIME,Acct-Session-Time
> AcctColumnDef ACCTDELAYTIME,Acct-Delay-Time
> AcctColumnDef ACCTSESSIONID,Acct-Session-Id
> AcctColumnDef ACCTTERMINATECAUSE,Acct-Terminate-Cause
> AcctColumnDef NASIDENTIFIER,NAS-Identifier
> AcctColumnDef NASPORT,NAS-Port
> AcctColumnDef ACCTSESSIONID,Acct-Session-Id
>
> </AuthBy>
> # Log accounting to a detail file
> AcctLogFileName %L/detail
>
> #For strictly operating at accounting start
>
> <Handler Acct-Status-Type = Start>
>
> PostAuthHook file:"%D/thomas.pl";
>
> </Handler>
>
>
> _#For strictly processing with Accounting Stop packets__
> __
> __<Handler Acct-Status-Type = Stop>__
> __
> __<AuthBy SQL>__
> __ Identifier Block-Quota-SQL__
> __
> __ DBSource dbi:mysql:radius__
> __ DBUsername _xxxxxxxx_
> __ DBAuth _xxxxxxxx_
> __
> __ AccountingStopsOnly__
> __ AccountingTable quotacouunter__
> __ AuthColumnDef username,User-Name,check__
> __
> __
> __
> __
> __
> __
> __ AuthSelect select monthlycounter from quotacounter \__
> __ where username='%n' \__
> __ And type = 'Q'__
> __ #AuthColumnDef 0, Session-Timeout, reply__
> __
> __ AcctSQLStatement update quotacounter set \__
> __ monthlycounter=monthlycounter+0%{Acct-Input-Octets} \__
> __ where username='%n' \__
> __ And Type = 'Q'__
> __
> __ AuthSelect select totalcounter from quotacounter \__
> __ where username='%n' \__
> __ And Type = 'Q'__
> __
> __ AcctSQLStatement update quotacounter set \__
> __ totalcounter=totalcounter+0%{Acct-Input-Octets} \__
> __ where username='%n' \__
> __ And Type = 'Q'__
> __
> __</AuthBy>__
> __
> __</Handler>__
> _
>
>
> # Accept processing of other accounting requests of the genre start and
> interim
>
> <Handler Request-Type = Accounting-Request>
>
> <AuthBy INTERNAL>
> AcctResult ACCEPT
> </AuthBy>
>
> </Handler>
>
>
>
> </Realm>
>
> --
> Best Regards,
>
> Thomas Kurian
> IT Security Engineer (B.Tech. – Electrical)
> Kuwaiti Canadian Consulting Group (www.kccg.com)
> T: +965 22435566
> F: +965 22415149
> E: [email protected]
>
>
>
> _______________________________________________
> radiator mailing list
> [email protected]
> http://www.open.com.au/mailman/listinfo/radiator
>
--
Heikki Vatiainen <[email protected]>
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
Platypus, Freeside, TACACS+, PAM, external, Active Directory, EAP, TLS,
TTLS, PEAP, TNC, WiMAX, RSA, Vasco, Yubikey, MOTP, HOTP, TOTP,
DIAMETER etc. Full source on Unix, Windows, MacOSX, Solaris, VMS,
NetWare etc.
_______________________________________________
radiator mailing list
[email protected]
http://www.open.com.au/mailman/listinfo/radiator
