We are using Radiator successfully for wired dot1x with PEAP-TLS and wireless PEAP-TLS and EAP-TLS for years. You can find quite a lot of example configs in the goodies directory all starting with eap_.
Best regards, Alex On 2013-02-27 14:34, benson, john wrote: I used radiator years ago for a much simpler task than what I have in mind now. We have a need to authenticate wired clients via Cisco switches using EAP-PEAP and EAP-TTLS to a radius server, where the radius server converts that authentication request into a secure LDAP authentication request to be passed on to our LDAP server which front-ends our Microsoft AD. We currently use Juniper SBR for similar authentication tasks, however, we've hit a limitation with this particular requirement. Can someone point me to some additional documentation that confirms or denies radiator's ability to do this? Regards John Benson _______________________________________________ radiator mailing list [email protected]<mailto:[email protected]> http://www.open.com.au/mailman/listinfo/radiator *"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"* T-Systems Austria GesmbH Rennweg 97-99, 1030 Wien Handelsgericht Wien, FN 79340b *"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"* Notice: This e-mail contains information that is confidential and may be privileged. If you are not the intended recipient, please notify the sender and then delete this e-mail immediately. *"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*
_______________________________________________ radiator mailing list [email protected] http://www.open.com.au/mailman/listinfo/radiator
