Hello support,

I am trying to authenticate against windows active directory with the AuthBy 
LSA.
This goes well without using the group item. That means that the communication 
with the window domain is OK . When I use the group item I cannot get a good 
authentication.
I am sure the user is a member of that specific group.
I have also tried to authenticate against a local group on the machine where 
Radiator is running on.
The result was the same. Ok without the group item and wrong with the group 
item.
I hope you can help me to find what I am doing wrong? Or can I better use LDAP2 
instead  of LSA ?
I have the radius.cfg and the log file attached with this message.
This handler starts at line 40in the config file. In the log file the results 
of that handler starts at line 332.

Technical specs :
Radiator is running on a VM ware server with windows server 2003 this is our 
test server.
The windows domain controller is running under window 2008 R2 server.
I use activestate perl and installed the Win32-Lsa.ppd
Also the security policy (SE_TCB_PRIVILEGE) is enabled for the user Radiator is 
running.
We are using EAP PEAP with MSCHAPv2


My regards,

R.D.Runia
ICT expert datacommunicatie
Directoraat ICT
LUMC
tel +31 71-5262616

Mon Mar  3 16:19:21 2014: DEBUG: Finished reading configuration file 
'C:\Program Files\Radiator\radius.cfg'
Mon Mar  3 16:19:21 2014: DEBUG: Reading dictionary file 'c:/Program 
Files/Radiator/dictionary'
Mon Mar  3 16:19:21 2014: INFO: This Perl installation can handle IPv6 
attributes in binary format only. IPv6 sockets are not supported. Consider 
installing Socket6.pm for full IPv6 support.
Mon Mar  3 16:19:21 2014: DEBUG: Creating authentication port 0.0.0.0:1645
Mon Mar  3 16:19:21 2014: DEBUG: Creating authentication port 0.0.0.0:1812
Mon Mar  3 16:19:21 2014: DEBUG: Creating accounting port 0.0.0.0:1646
Mon Mar  3 16:19:21 2014: DEBUG: Creating accounting port 0.0.0.0:1813
Mon Mar  3 16:19:21 2014: NOTICE: Server started: Radiator 4.12.1 on 
delphizwaluw
Mon Mar  3 16:19:42 2014: DEBUG: Packet dump:
*** Received from 10.250.25.240 port 20009 ....
Code:       Access-Request
Identifier: 11
Authentic:  <191><26><19>9<190><173><210>!Ea<208>cb<167><244>U
Attributes:
        NAS-Port-Id = "AP1/1"
        Calling-Station-Id = "00-24-D7-C0-4F-F8"
        Called-Station-Id = "00-0B-0E-84-68-80:Riemer_test"
        Service-Type = Framed-User
        EAP-Message = <2><1><0><20><1>[email protected]
        User-Name = "[email protected]"
        NAS-Port = 1216
        NAS-Port-Type = Wireless-IEEE-802-11
        NAS-IP-Address = 10.250.25.240
        NAS-Identifier = "Trapeze"
        Message-Authenticator = 
B<137><200><247>w<168><175><224><0><11><230><179><227>L<150><12>

Mon Mar  3 16:19:42 2014: DEBUG: Handling request with Handler 
'Realm=/^lumc\.nl$/i, EAP-Message=/.+/', Identifier ''
Mon Mar  3 16:19:43 2014: DEBUG:  Deleting session for [email protected], 
10.250.25.240, 1216
Mon Mar  3 16:19:43 2014: DEBUG: Handling with Radius::AuthFILE: OuterAuth
Mon Mar  3 16:19:43 2014: DEBUG: Handling with EAP: code 2, 1, 20, 1
Mon Mar  3 16:19:43 2014: DEBUG: Response type 1
Mon Mar  3 16:19:45 2014: DEBUG: EAP result: 3, EAP PEAP Challenge
Mon Mar  3 16:19:45 2014: DEBUG: AuthBy FILE result: CHALLENGE, EAP PEAP 
Challenge
Mon Mar  3 16:19:45 2014: DEBUG: Access challenged for [email protected]: EAP 
PEAP Challenge
Mon Mar  3 16:19:45 2014: DEBUG: Packet dump:
*** Sending to 10.250.25.240 port 20009 ....
Code:       Access-Challenge
Identifier: 11
Authentic:  <201>$<10><189>J<11><195><19>G<2>+/8<132><28><175>
Attributes:
        EAP-Message = <1><2><0><6><25> 
        Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>

Mon Mar  3 16:19:45 2014: DEBUG: Packet dump:
*** Received from 10.250.25.240 port 20009 ....
Code:       Access-Request
Identifier: 12
Authentic:  @[<<246>1<229><239>1<208><179>2k<23><149><231>z
Attributes:
        NAS-Port-Id = "AP1/1"
        Calling-Station-Id = "00-24-D7-C0-4F-F8"
        Called-Station-Id = "00-0B-0E-84-68-80:Riemer_test"
        Service-Type = Framed-User
        EAP-Message = <2><2><0><20><1>[email protected]
        User-Name = "[email protected]"
        NAS-Port = 1216
        NAS-Port-Type = Wireless-IEEE-802-11
        NAS-IP-Address = 10.250.25.240
        NAS-Identifier = "Trapeze"
        Message-Authenticator = 
<231><130><2>P<132><179><240><30><171><8>p<140><237>lw<233>

Mon Mar  3 16:19:45 2014: DEBUG: Handling request with Handler 
'Realm=/^lumc\.nl$/i, EAP-Message=/.+/', Identifier ''
Mon Mar  3 16:19:45 2014: DEBUG:  Deleting session for [email protected], 
10.250.25.240, 1216
Mon Mar  3 16:19:45 2014: DEBUG: Handling with Radius::AuthFILE: OuterAuth
Mon Mar  3 16:19:45 2014: DEBUG: Handling with EAP: code 2, 2, 20, 1
Mon Mar  3 16:19:45 2014: DEBUG: Response type 1
Mon Mar  3 16:19:45 2014: DEBUG: EAP result: 3, EAP PEAP Challenge
Mon Mar  3 16:19:45 2014: DEBUG: AuthBy FILE result: CHALLENGE, EAP PEAP 
Challenge
Mon Mar  3 16:19:45 2014: DEBUG: Access challenged for [email protected]: EAP 
PEAP Challenge
Mon Mar  3 16:19:45 2014: DEBUG: Packet dump:
*** Sending to 10.250.25.240 port 20009 ....
Code:       Access-Challenge
Identifier: 12
Authentic:  .<161><209><195>m]<1><187>\<13>&Ym<202>{<178>
Attributes:
        EAP-Message = <1><3><0><6><25> 
        Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>

Mon Mar  3 16:19:45 2014: DEBUG: Packet dump:
*** Received from 10.250.25.240 port 20009 ....
Code:       Access-Request
Identifier: 13
Authentic:  Mw<3><135>G<226>M$<229><239><129><217>9h<241><13>
Attributes:
        NAS-Port-Id = "AP1/1"
        Calling-Station-Id = "00-24-D7-C0-4F-F8"
        Called-Station-Id = "00-0B-0E-84-68-80:Riemer_test"
        Service-Type = Framed-User
        User-Name = "[email protected]"
        NAS-Port = 1216
        EAP-Message = 
<2><3><0>R<25><128><0><0><0>H<22><3><1><0>C<1><0><0>?<3><1>S<20><157><145><208><233><15>S<11><230><255>A<192>~<241><220><24><<254><226><12><215>I<21>daF<157><195><30>:<136><0><0><24><0>9<0>8<0>3<0>2<0><22><0><19><0>5<0>/<0><10><0><5><0><4><0><255><1><0>
        NAS-Port-Type = Wireless-IEEE-802-11
        NAS-IP-Address = 10.250.25.240
        NAS-Identifier = "Trapeze"
        Message-Authenticator = 
M<244>ZB<11><26>F<238><130><181><232><136>Kr<221>V

Mon Mar  3 16:19:45 2014: DEBUG: Handling request with Handler 
'Realm=/^lumc\.nl$/i, EAP-Message=/.+/', Identifier ''
Mon Mar  3 16:19:45 2014: DEBUG:  Deleting session for [email protected], 
10.250.25.240, 1216
Mon Mar  3 16:19:45 2014: DEBUG: Handling with Radius::AuthFILE: OuterAuth
Mon Mar  3 16:19:45 2014: DEBUG: Handling with EAP: code 2, 3, 82, 25
Mon Mar  3 16:19:45 2014: DEBUG: Response type 25
Mon Mar  3 16:19:45 2014: DEBUG: EAP TLS SSL_accept result: -1, 2, 8576
Mon Mar  3 16:19:45 2014: DEBUG: EAP result: 3, EAP PEAP Challenge
Mon Mar  3 16:19:45 2014: DEBUG: AuthBy FILE result: CHALLENGE, EAP PEAP 
Challenge
Mon Mar  3 16:19:45 2014: DEBUG: Access challenged for [email protected]: EAP 
PEAP Challenge
Mon Mar  3 16:19:45 2014: DEBUG: Packet dump:
*** Sending to 10.250.25.240 port 20009 ....
Code:       Access-Challenge
Identifier: 13
Authentic:  <16>(<198><210>|^<182>/<250><136><136><169><234><168>C<219>
Attributes:
        EAP-Message = 
<1><4><4><10><25><192><0><0><7><185><22><3><1><0>Q<2><0><0>M<3><1>S<20><157><145><17><182>.<200><9><156><214>kg;<17><250>%<167><13><162><157>i<127><196><166><207><227><214><12><143><162><193>
 
<P/<176><201><8><248><224><21>d4<224>|<214>z<127><3>j@<129>#?<16><184><159>/UY<137><185><132><160><0>5<0><0><5><255><1><0><1><0><22><3><1><7>U<11><0><7>Q<0><7>N<0><2><251>0<130><2><247>0<130><2>`<160><3><2><1><2><2><1><2>0<13><6><9>*<134>H<134><247><13><1><1><5><5><0>0<129><202>1<11>0<9><6><3>U<4><6><19><2>AU1<17>0<15><6><3>U<4><8><19><8>Victoria1<18>0<16><6><3>U<4><7><19><9>Melbourne1<30>0<28><6><3>U<4><10><19><21>OSC
 Demo Certificates1!0<31><6><3>U<4><11><19><24>Test Certific
        EAP-Message = ate Section1/0-<6><3>U<4><3><19>&OSC Test CA (do not use 
in production)1 
0<30><6><9>*<134>H<134><247><13><1><9><1><22><17>[email protected]<30><23><13>130814113720Z<23><13>150814113720Z0<129><158>1<11>0<9><6><3>U<4><6><19><2>AU1<17>0<15><6><3>U<4><8><19><8>Victoria1<18>0<16><6><3>U<4><7><19><9>Melbourne1<30>0<28><6><3>U<4><10><19><21>OSC
 Demo Certificates1!0<31><6><3>U<4><11><19><24>Test Certificate Section1%0#<6>
        EAP-Message = 
<3>U<4><3><19><28>test.server.some.company.com0<129><159>0<13><6><9>*<134>H<134><247><13><1><1><1><5><0><3><129><141><0>0<129><137><2><129><129><0><169><149><166><1><157><225><10><237><198><15><194><129>3<182><27><233>av<237><243><224><132><135>@<243>}<255><164>+<181><232><130><10><23><151><23><220>"/<4><127><147>"<226><192><132><149><190><255><168><141><221><233>`<149><141><198><196>b<160>"4<233><13><0><215><254>@<183><135><212><7><253>}<241><191><149><163><181><185>><249><20><192>39<150>IW<166><235><196><29>29Tk<194>v+U<195>%<11><230>hx>t_<172><141>.Zl<29>r<247>
 
<229><28>T<181><163><223>{<169><157><2><3><1><0><1><163><23>0<21>0<19><6><3>U<29>%<4><12>0<10><6><8>+<6><1><5><5><7><3><1>0<13><6><9>*<134>H<134><247><13><1><1><5><5><0><3><129><129><0>M<177><199><6><242><30><25>L@<242><151>T7
        EAP-Message = 
^#<27><161>?;<176>Rt<159><184><0><169>[<4><22>:<19>v&=<15><130>^<235><242><254><242><242>5<164><177>;<191>(?<243><149>D<152>&<219><202>
 
F<193><14><185><141><6><170>w<s<188><254>u<162>?<201><8><5><149>x<14><238><131><18><150><162>$H<227>Y<220><211><148><159><250><177><131><154>\\I<136><197><143>&WJ<237>X<153><168><169><24>!<243><19><176>#d#<1><176>B<241>}<223><247>0<247><225>"<0><4>M0<130><4>I0<130><3><178><160><3><2><1><2><2><9><0><252>W<246><223>Z<178>#<146>0<13><6><9>*<134>H<134><247><13><1><1><5><5><0>0<129><202>1<11>0<9><6><3>U<4><6><19><2>AU1<17>0<15><6><3>U<4><8><19><8>Victoria1<18>0<16><6><3>U<4><7><19><9>Melbourne1<30>0<28><6><3>U<4><10><19><21>OSC
 Demo Certificates1!0<31><6><3>U<4><11>
        EAP-Message = <19><24>Test Certificate Sec
        Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>

Mon Mar  3 16:19:45 2014: DEBUG: Packet dump:
*** Received from 10.250.25.240 port 20009 ....
Code:       Access-Request
Identifier: 14
Authentic:  Z<7>'F<210><18><139>><186>(<21><231>1<137>*<127>
Attributes:
        NAS-Port-Id = "AP1/1"
        Calling-Station-Id = "00-24-D7-C0-4F-F8"
        Called-Station-Id = "00-0B-0E-84-68-80:Riemer_test"
        Service-Type = Framed-User
        User-Name = "[email protected]"
        NAS-Port = 1216
        EAP-Message = <2><4><0><6><25><0>
        NAS-Port-Type = Wireless-IEEE-802-11
        NAS-IP-Address = 10.250.25.240
        NAS-Identifier = "Trapeze"
        Message-Authenticator = 
G<147><132><170>X<247><139><229><17><203>Z<28>2<11>Z:

Mon Mar  3 16:19:46 2014: DEBUG: Handling request with Handler 
'Realm=/^lumc\.nl$/i, EAP-Message=/.+/', Identifier ''
Mon Mar  3 16:19:46 2014: DEBUG:  Deleting session for [email protected], 
10.250.25.240, 1216
Mon Mar  3 16:19:46 2014: DEBUG: Handling with Radius::AuthFILE: OuterAuth
Mon Mar  3 16:19:46 2014: DEBUG: Handling with EAP: code 2, 4, 6, 25
Mon Mar  3 16:19:46 2014: DEBUG: Response type 25
Mon Mar  3 16:19:46 2014: DEBUG: EAP result: 3, EAP PEAP Challenge
Mon Mar  3 16:19:46 2014: DEBUG: AuthBy FILE result: CHALLENGE, EAP PEAP 
Challenge
Mon Mar  3 16:19:46 2014: DEBUG: Access challenged for [email protected]: EAP 
PEAP Challenge
Mon Mar  3 16:19:46 2014: DEBUG: Packet dump:
*** Sending to 10.250.25.240 port 20009 ....
Code:       Access-Challenge
Identifier: 14
Authentic:  |Z<138><143><223><27><223><221><238><19><219><234><132>l<185>l
Attributes:
        EAP-Message = <1><5><3><191><25><0>tion1/0-<6><3>U<4><3><19>&OSC Test 
CA (do not use in production)1 
0<30><6><9>*<134>H<134><247><13><1><9><1><22><17>[email protected]<30><23><13>130814113720Z<23><13>150814113720Z0<129><202>1<11>0<9><6><3>U<4><6><19><2>AU1<17>0<15><6><3>U<4><8><19><8>Victoria1<18>0<16><6><3>U<4><7><19><9>Melbourne1<30>0<28><6><3>U<4><10><19><21>OSC
 Demo Certificates1!0<31><6><3>U<4><11><19><24>Test Certificate 
Section1/0-<6><3>
        EAP-Message = U<4><3><19>&OSC Test CA (do not use in production)1 
0<30><6><9>*<134>H<134><247><13><1><9><1><22><17>[email protected]<129><159>0<13><6><9>*<134>H<134><247><13><1><1><1><5><0><3><129><141><0>0<129><137><2><129><129><0><191><145>Kj"<188><242><244>19<229><177>f7(<148><7><17><128><3>u<4><248><135>b<195>;:5<178><163><186><230><12><222>X<176><184><255><128><169><145><20>o*(#<205><213>R<212><11><19><212><13>CD<139><252><7>pg<245><31><232><17>i{<28><30>p_<162>><222>4<242><208>XX<132><9><16><31><151><242>*<227>u5<163>^<215><20><237><242><24>JW]I<217><158><247><23><12><170>.<249>O<218><214><202><167>b<19>v4<234><4>j<131><213>!<180><187><221><171><2><3><1><0><1><163><130><1>30<130><1>/0<29><6><3>U<29>
        EAP-Message = 
<14><4><22><4><20>?<211><175>w<20><244>6<18><1>Pf/<28>^4<184><229><229>fk0<129><255><6><3>U<29>#<4><129><247>0<129><244><128><20>?<211><175>w<20><244>6<18><1>Pf/<28>^4<184><229><229>fk<161><129><208><164><129><205>0<129><202>1<11>0<9><6><3>U<4><6><19><2>AU1<17>0<15><6><3>U<4><8><19><8>Victoria1<18>0<16><6><3>U<4><7><19><9>Melbourne1<30>0<28><6><3>U<4><10><19><21>OSC
 Demo Certificates1!0<31><6><3>U<4><11><19><24>Test Certificate 
Section1/0-<6><3>U<4><3><19>&OSC Test CA (do not use in production)1 
0<30><6><9>*<134>H<134><247><13><1><9><1>
        EAP-Message = 
<22><17>[email protected]<130><9><0><252>W<246><223>Z<178>#<146>0<12><6><3>U<29><19><4><5>0<3><1><1><255>0<13><6><9>*<134>H<134><247><13><1><1><5><5><0><3><129><129><0><147>H<241><147><8>:1<188><181><206><3>[8e<142>{<142>#<178>4<252><3>P<206><18>W<254>o^<240>:.<202><221>e<174><148>h<212>kHP4<7>@i<184>U<241><204><17><196>"<185><14><223><246><131>;<182>p4<184><207><0><197><206>.3P<169>$<184><198><174>d;<16><219><22>@<1>Q<199>(<7>\<188><185>'<204><167><223><253><220>H<180><144><182><243><249><207><194>O<147><161><198>"<7><193><4><24><206><234><243><0>y<237><225><143><210><231><197>a<15><180><191><171><22><3><1><0><4><14><0><0><0>
        Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>

Mon Mar  3 16:19:46 2014: DEBUG: Packet dump:
*** Received from 10.250.25.240 port 20009 ....
Code:       Access-Request
Identifier: 15
Authentic:  <220>X<198><149><163><240><197>^Y<10><152>@<138><138><155><211>
Attributes:
        NAS-Port-Id = "AP1/1"
        Calling-Station-Id = "00-24-D7-C0-4F-F8"
        Called-Station-Id = "00-0B-0E-84-68-80:Riemer_test"
        Service-Type = Framed-User
        User-Name = "[email protected]"
        NAS-Port = 1216
        EAP-Message = 
<2><5><0><208><25><128><0><0><0><198><22><3><1><0><134><16><0><0><130><0><128>=<180><206><141><253><142><11><219><182><233><175><228>><246><225><180><201>?<12><224>r<189><148>3<25><150><18><216>/l~$<253>ce1_<230>rO2<6><19>k\<247>Z<160><238><137><184><21>>&8<192>]<138><225>m<13><212>U<13><198><17>5<214><192><128><143>*<29>!'<140><212><151><153>f<185>h<206><8><191><221>l<224><252>Y<223><210>`<226><214><215><10>"<176><214><<133>_<145>2<9><205><194><20>k<21>f<158>\\[<127>}<130><191><2><140><3>f/<193>cg<20><3><1><0><1><1><22><3><1><0>0<167>e<243><187>J<139><143>`z<29><178><154><165><179>=<17>L<186>z<8><146><230><196><179><158>Q<153>j<158><206><5><249><211><3><17><29><208><201><192>q]<210>G#.I<227><172>
        NAS-Port-Type = Wireless-IEEE-802-11
        NAS-IP-Address = 10.250.25.240
        NAS-Identifier = "Trapeze"
        Message-Authenticator = ;,\MV<247>j<163>*<30>9<203><185>R<132><127>

Mon Mar  3 16:19:46 2014: DEBUG: Handling request with Handler 
'Realm=/^lumc\.nl$/i, EAP-Message=/.+/', Identifier ''
Mon Mar  3 16:19:46 2014: DEBUG:  Deleting session for [email protected], 
10.250.25.240, 1216
Mon Mar  3 16:19:46 2014: DEBUG: Handling with Radius::AuthFILE: OuterAuth
Mon Mar  3 16:19:46 2014: DEBUG: Handling with EAP: code 2, 5, 208, 25
Mon Mar  3 16:19:46 2014: DEBUG: Response type 25
Mon Mar  3 16:19:46 2014: DEBUG: EAP TLS SSL_accept result: 1, 0, 3
Mon Mar  3 16:19:46 2014: DEBUG: EAP result: 3, EAP PEAP Challenge
Mon Mar  3 16:19:46 2014: DEBUG: AuthBy FILE result: CHALLENGE, EAP PEAP 
Challenge
Mon Mar  3 16:19:46 2014: DEBUG: Access challenged for [email protected]: EAP 
PEAP Challenge
Mon Mar  3 16:19:46 2014: DEBUG: Packet dump:
*** Sending to 10.250.25.240 port 20009 ....
Code:       Access-Challenge
Identifier: 15
Authentic:  vo<193><164><133>z"<18><195>f<183>$<161><249><14><130>
Attributes:
        EAP-Message = 
<1><6><0>E<25><128><0><0><0>;<20><3><1><0><1><1><22><3><1><0>0&<193><196><187><164>n<193><213>{<184><241><5>#g<130>+<204>"<2><29><161><211><238>tG<14>S<223><145>_]<3><234>Hc<14><14>K<186><141>D<168>5R<227><30><194><223>
        Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>

Mon Mar  3 16:19:46 2014: DEBUG: Packet dump:
*** Received from 10.250.25.240 port 20009 ....
Code:       Access-Request
Identifier: 16
Authentic:  <0>H<198><242>><185><202><203><203><199>m|@X<193><151>
Attributes:
        NAS-Port-Id = "AP1/1"
        Calling-Station-Id = "00-24-D7-C0-4F-F8"
        Called-Station-Id = "00-0B-0E-84-68-80:Riemer_test"
        Service-Type = Framed-User
        User-Name = "[email protected]"
        NAS-Port = 1216
        EAP-Message = <2><6><0><6><25><0>
        NAS-Port-Type = Wireless-IEEE-802-11
        NAS-IP-Address = 10.250.25.240
        NAS-Identifier = "Trapeze"
        Message-Authenticator = 
<127><236>#<232>3<241><215><213><186><29>,<0><172><176>)q

Mon Mar  3 16:19:46 2014: DEBUG: Handling request with Handler 
'Realm=/^lumc\.nl$/i, EAP-Message=/.+/', Identifier ''
Mon Mar  3 16:19:46 2014: DEBUG:  Deleting session for [email protected], 
10.250.25.240, 1216
Mon Mar  3 16:19:46 2014: DEBUG: Handling with Radius::AuthFILE: OuterAuth
Mon Mar  3 16:19:46 2014: DEBUG: Handling with EAP: code 2, 6, 6, 25
Mon Mar  3 16:19:46 2014: DEBUG: Response type 25
Mon Mar  3 16:19:46 2014: DEBUG: EAP result: 3, EAP PEAP Challenge
Mon Mar  3 16:19:46 2014: DEBUG: AuthBy FILE result: CHALLENGE, EAP PEAP 
Challenge
Mon Mar  3 16:19:46 2014: DEBUG: Access challenged for [email protected]: EAP 
PEAP Challenge
Mon Mar  3 16:19:46 2014: DEBUG: Packet dump:
*** Sending to 10.250.25.240 port 20009 ....
Code:       Access-Challenge
Identifier: 16
Authentic:  YD~<193><135><193><158>Bt<14><221><203>v-0<173>
Attributes:
        EAP-Message = <1><7><0>+<25><0><23><3><1><0> 
7<128>3l<215><244><141>k<18><200>GG<202><238>D<237>u<0><1><158><23>,?<192><24>]<2>G<192>r<199><243>
        Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>

Mon Mar  3 16:19:46 2014: DEBUG: Packet dump:
*** Received from 10.250.25.240 port 20009 ....
Code:       Access-Request
Identifier: 17
Authentic:  "<228><22>j<154><203><251><209>0<128><150>{<210><147><19><23>
Attributes:
        NAS-Port-Id = "AP1/1"
        Calling-Station-Id = "00-24-D7-C0-4F-F8"
        Called-Station-Id = "00-0B-0E-84-68-80:Riemer_test"
        Service-Type = Framed-User
        User-Name = "[email protected]"
        NAS-Port = 1216
        EAP-Message = 
<2><7><0>;<25><0><23><3><1><0>0g<214>]A?<183><249><222>bL<169><2><230><12>x<241><138><10>2<195><30>}<149><138><149><26><146><244><165>/<182><194><210>.<215>(2<167>j<254><197><252>OS<247><205><152>+
        NAS-Port-Type = Wireless-IEEE-802-11
        NAS-IP-Address = 10.250.25.240
        NAS-Identifier = "Trapeze"
        Message-Authenticator = 
8VN<194>F<30><241><209>r<169><138><140>R<237><228><200>

Mon Mar  3 16:19:46 2014: DEBUG: Handling request with Handler 
'Realm=/^lumc\.nl$/i, EAP-Message=/.+/', Identifier ''
Mon Mar  3 16:19:46 2014: DEBUG:  Deleting session for [email protected], 
10.250.25.240, 1216
Mon Mar  3 16:19:46 2014: DEBUG: Handling with Radius::AuthFILE: OuterAuth
Mon Mar  3 16:19:46 2014: DEBUG: Handling with EAP: code 2, 7, 59, 25
Mon Mar  3 16:19:46 2014: DEBUG: Response type 25
Mon Mar  3 16:19:46 2014: DEBUG: EAP PEAP inner authentication request for 
[email protected]
Mon Mar  3 16:19:46 2014: DEBUG: PEAP Tunnelled request Packet dump:
Code:       Access-Request
Identifier: UNDEF
Authentic:  D6%<242>xwLG<141><162><145><20><146><161>z<127>
Attributes:
        EAP-Message = <2><7><0><16><1>[email protected]
        Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
        NAS-IP-Address = 10.250.25.240
        NAS-Identifier = "Trapeze"
        NAS-Port = 1216
        Calling-Station-Id = "00-24-D7-C0-4F-F8"
        User-Name = "[email protected]"

Mon Mar  3 16:19:46 2014: DEBUG: Handling request with Handler 
'Realm=/^lumc\.nl$/i,TunnelledByPEAP=1', Identifier ''
Mon Mar  3 16:19:46 2014: DEBUG:  Deleting session for [email protected], 
10.250.25.240, 1216
Mon Mar  3 16:19:46 2014: DEBUG: Handling with Radius::AuthGROUP: 
Mon Mar  3 16:19:46 2014: DEBUG: Handling with Radius::AuthLSA: 
Mon Mar  3 16:19:46 2014: DEBUG: Handling with EAP: code 2, 7, 16, 1
Mon Mar  3 16:19:46 2014: DEBUG: Response type 1
Mon Mar  3 16:19:47 2014: DEBUG: EAP result: 3, EAP MSCHAP-V2 Challenge
Mon Mar  3 16:19:47 2014: DEBUG: Radius::AuthGROUP:  result: CHALLENGE, EAP 
MSCHAP-V2 Challenge
Mon Mar  3 16:19:47 2014: DEBUG: AuthBy GROUP result: CHALLENGE, EAP MSCHAP-V2 
Challenge
Mon Mar  3 16:19:47 2014: DEBUG: Access challenged for [email protected]: EAP 
MSCHAP-V2 Challenge
Mon Mar  3 16:19:47 2014: DEBUG: Returned PEAP tunnelled packet dump:
Code:       Access-Challenge
Identifier: UNDEF
Authentic:  D6%<242>xwLG<141><162><145><20><146><161>z<127>
Attributes:
        EAP-Message = 
<1><8><0>&<26><1><8><0>!<16>iUPe<195>@A<159><127><18><223><19><142><149>wbdelphizwaluw
        Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>

Mon Mar  3 16:19:47 2014: DEBUG: EAP result: 3, EAP PEAP inner authentication 
redispatched to a Handler
Mon Mar  3 16:19:47 2014: DEBUG: AuthBy FILE result: CHALLENGE, EAP PEAP inner 
authentication redispatched to a Handler
Mon Mar  3 16:19:47 2014: DEBUG: Access challenged for [email protected]: EAP 
PEAP inner authentication redispatched to a Handler
Mon Mar  3 16:19:47 2014: DEBUG: Packet dump:
*** Sending to 10.250.25.240 port 20009 ....
Code:       Access-Challenge
Identifier: 17
Authentic:  <150><21><159>@t<193><160>F<153><190><248>S<239>0<230><139>
Attributes:
        EAP-Message = 
<1><8><0>K<25><0><23><3><1><0>@z2<190><175><169>e<13><250><249><240><241><214><7><202><213><183>
 
<206>F<187>z;<240>}<23><26><193><137>/7<201>;(<253>h<181>)<31>&<133><248>Z<222>E<20>%<206><8>u<21><153><234><179><255><246><154><6>i<190><254><189><30><151>D
        Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>

Mon Mar  3 16:19:47 2014: DEBUG: Packet dump:
*** Received from 10.250.25.240 port 20009 ....
Code:       Access-Request
Identifier: 18
Authentic:  <135><254><202><215>e<168><245><135><209>:D<232><254><6><11>M
Attributes:
        NAS-Port-Id = "AP1/1"
        Calling-Station-Id = "00-24-D7-C0-4F-F8"
        Called-Station-Id = "00-0B-0E-84-68-80:Riemer_test"
        Service-Type = Framed-User
        User-Name = "[email protected]"
        NAS-Port = 1216
        EAP-Message = 
<2><8><0>k<25><0><23><3><1><0>`<191><174><196><246><207><172><185><136><130><161><158>4j<200><131><191><19><199><234>C|<175><142><234>O';<201><139><136>=
 
<191><172><226><220><212><213><127><199><181><175><24><1>V<28>D<25>vs<5><165><195>w<132><248><158>M<3>"<134>X+<139>Q<8><144><246>j<237><167><182><185>d1<249><255><137><157><255>8<171><137><233>(UI<165>h<170><3>(m\<200>R
        NAS-Port-Type = Wireless-IEEE-802-11
        NAS-IP-Address = 10.250.25.240
        NAS-Identifier = "Trapeze"
        Message-Authenticator = 
<225>W<165><179><208>5B<144><25><229><250><129><18>H<204><17>

Mon Mar  3 16:19:47 2014: DEBUG: Handling request with Handler 
'Realm=/^lumc\.nl$/i, EAP-Message=/.+/', Identifier ''
Mon Mar  3 16:19:47 2014: DEBUG:  Deleting session for [email protected], 
10.250.25.240, 1216
Mon Mar  3 16:19:47 2014: DEBUG: Handling with Radius::AuthFILE: OuterAuth
Mon Mar  3 16:19:47 2014: DEBUG: Handling with EAP: code 2, 8, 107, 25
Mon Mar  3 16:19:47 2014: DEBUG: Response type 25
Mon Mar  3 16:19:47 2014: DEBUG: EAP PEAP inner authentication request for 
[email protected]
Mon Mar  3 16:19:47 2014: DEBUG: PEAP Tunnelled request Packet dump:
Code:       Access-Request
Identifier: UNDEF
Authentic:  <8><13><14>w<157><141><140><199><2>I<220>y<137>r}R
Attributes:
        EAP-Message = 
<2><8><0>><26><2><8><0>=1<212><199>F<191><252>!<146>Lw<145><168><175><10>)I 
<0><0><0><0><0><0><0><0><148>JJ{<17>W<181><6>TGm7<135><23><2><148><221>o<211><143><12><161>^*<0>rdrunia
        Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
        NAS-IP-Address = 10.250.25.240
        NAS-Identifier = "Trapeze"
        NAS-Port = 1216
        Calling-Station-Id = "00-24-D7-C0-4F-F8"
        User-Name = "[email protected]"

Mon Mar  3 16:19:47 2014: DEBUG: Handling request with Handler 
'Realm=/^lumc\.nl$/i,TunnelledByPEAP=1', Identifier ''
Mon Mar  3 16:19:47 2014: DEBUG:  Deleting session for [email protected], 
10.250.25.240, 1216
Mon Mar  3 16:19:47 2014: DEBUG: Handling with Radius::AuthGROUP: 
Mon Mar  3 16:19:47 2014: DEBUG: Handling with Radius::AuthLSA: 
Mon Mar  3 16:19:47 2014: DEBUG: Handling with EAP: code 2, 8, 62, 26
Mon Mar  3 16:19:47 2014: DEBUG: Response type 26
Mon Mar  3 16:19:47 2014: DEBUG: Radius::AuthLSA looks for match with rdrunia 
[[email protected]]
Mon Mar  3 16:19:47 2014: DEBUG: Checking LSA Group membership for 
\\DC-LUMCNET03, lumc-wireless-0, anonymous
Mon Mar  3 16:19:47 2014: DEBUG: Radius::AuthLSA REJECT: AuthBy LSA User is not 
a member of any Group: rdrunia [[email protected]]
Mon Mar  3 16:19:47 2014: DEBUG: EAP Failure, elapsed time 0.755697
Mon Mar  3 16:19:47 2014: DEBUG: EAP result: 1, EAP MSCHAP V2 failed: no such 
user rdrunia
Mon Mar  3 16:19:47 2014: DEBUG: Radius::AuthGROUP:  result: REJECT, EAP MSCHAP 
V2 failed: no such user rdrunia
Mon Mar  3 16:19:47 2014: DEBUG: AuthBy GROUP result: REJECT, EAP MSCHAP V2 
failed: no such user rdrunia
Mon Mar  3 16:19:47 2014: INFO: Access rejected for [email protected]: EAP 
MSCHAP V2 failed: no such user rdrunia
Mon Mar  3 16:19:47 2014: DEBUG: Returned PEAP tunnelled packet dump:
Code:       Access-Reject
Identifier: UNDEF
Authentic:  <8><13><14>w<157><141><140><199><2>I<220>y<137>r}R
Attributes:
        EAP-Message = <4><8><0><4>
        Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
        Reply-Message = "Request Denied"

Mon Mar  3 16:19:47 2014: DEBUG: EAP result: 3, EAP PEAP inner authentication 
redispatched to a Handler
Mon Mar  3 16:19:47 2014: DEBUG: AuthBy FILE result: CHALLENGE, EAP PEAP inner 
authentication redispatched to a Handler
Mon Mar  3 16:19:47 2014: DEBUG: Access challenged for [email protected]: EAP 
PEAP inner authentication redispatched to a Handler
Mon Mar  3 16:19:47 2014: DEBUG: Packet dump:
*** Sending to 10.250.25.240 port 20009 ....
Code:       Access-Challenge
Identifier: 18
Authentic:  <194><224>!<218><21><253>}<184><231><194>Z<157><145><229><7><5>
Attributes:
        EAP-Message = <1><9><0>+<25><0><23><3><1><0> 
<215><153><198>}<132><170><176>7<147>k<231><129>Y|`<210><247><154>]<155><16>Ly<2>6<140>b<227>4<163>c<4>
        Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>

Mon Mar  3 16:19:47 2014: DEBUG: Packet dump:
*** Received from 10.250.25.240 port 20009 ....
Code:       Access-Request
Identifier: 19
Authentic:  Wi<130><173><224><166>_<208><171><178><197><255>X>G)
Attributes:
        NAS-Port-Id = "AP1/1"
        Calling-Station-Id = "00-24-D7-C0-4F-F8"
        Called-Station-Id = "00-0B-0E-84-68-80:Riemer_test"
        Service-Type = Framed-User
        User-Name = "[email protected]"
        NAS-Port = 1216
        EAP-Message = <2><9><0>+<25><0><23><3><1><0> 
'G<168><185><135>F<189><194>~<19>qQ|Ug<128><139><8><17><210><193>{n<227><175>0<159>$<131><188><168>`
        NAS-Port-Type = Wireless-IEEE-802-11
        NAS-IP-Address = 10.250.25.240
        NAS-Identifier = "Trapeze"
        Message-Authenticator = a<196><26>l<148><167><150><12>OT<24><244>nQ9B

Mon Mar  3 16:19:48 2014: DEBUG: Handling request with Handler 
'Realm=/^lumc\.nl$/i, EAP-Message=/.+/', Identifier ''
Mon Mar  3 16:19:48 2014: DEBUG:  Deleting session for [email protected], 
10.250.25.240, 1216
Mon Mar  3 16:19:48 2014: DEBUG: Handling with Radius::AuthFILE: OuterAuth
Mon Mar  3 16:19:48 2014: DEBUG: Handling with EAP: code 2, 9, 43, 25
Mon Mar  3 16:19:48 2014: DEBUG: Response type 25
Mon Mar  3 16:19:48 2014: DEBUG: EAP Failure, elapsed time 2.572051
Mon Mar  3 16:19:48 2014: DEBUG: EAP result: 1, PEAP Authentication Failure
Mon Mar  3 16:19:48 2014: DEBUG: AuthBy FILE result: REJECT, PEAP 
Authentication Failure
Mon Mar  3 16:19:48 2014: INFO: Access rejected for [email protected]: PEAP 
Authentication Failure
Mon Mar  3 16:19:48 2014: DEBUG: Packet dump:
*** Sending to 10.250.25.240 port 20009 ....
Code:       Access-Reject
Identifier: 19
Authentic:  <238><186><13>=<176><157><1><211>|=<149>K<135>x<145>(
Attributes:
        EAP-Message = <4><9><0><4>
        Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
        Reply-Message = "Request Denied"

Attachment: radius.cfg
Description: radius.cfg

_______________________________________________
radiator mailing list
[email protected]
http://www.open.com.au/mailman/listinfo/radiator

Reply via email to