If you look at the gallery shots on this page (click the Radio top right) http://www.logitechsqueezebox.com/products/squeezebox-radio.html
you will see there are no LEDs in the ethernet connection on the back of the Radio. If there was, this is not something that could be controlled by firmware. the control of them is purely at the hardware level of the ethernet interface it is connected to. It you have a look at your PC when it is off, the lights are still on when a cable is connected. -- funkstar my collection: *1*x squeezebox radio *1*x squeezebox touch *1*x squeezebox boom *2*x controller, *1*x receiver *2*x sb3 (sliver/black), *1*x sb2 wired (silver) *1*x sb (black), *1*x slimp3 (with rear shield) interested in any others if you have them! ------------------------------------------------------------------------ funkstar's Profile: http://forums.slimdevices.com/member.php?userid=2335 View this thread: http://forums.slimdevices.com/showthread.php?t=68258 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
