michael.tanner;548301 Wrote: > 1. yes, remember: with Ethernet it works fine > 2. I tried both, same result > 3. I do not use any MAC address filters, they are useless because > unsecure, I use WPA2-PSK > 4. logs see below > 5. The AP shows associated, but the IP is shown as 0.0.0.0 > > Interface Dot11Radio0, Station 0004.2026.3881 Associated KEY_MGMT[WPAv2 > PSK] > > SSID home$net : > Device Type Name IP Address MAC Address State Parent VLAN > ccx-client NONE 0.0.0.0 0004.2026.3881 Associated self none
Do you have a limit on the router/AP on the total number of wlan devices? (or on the range of IP addresses available to wlan devices? -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=78859 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
