I will provide some more information, maybe it will help in resolving the issue:
Squeezebox Radio Firmware version 7.7.2 r9663, hardware version 7. The radio has been purchased approx. 1 week ago, and it was working without any problems. The artwork of almost all radio stations which I was receiving was present! A network problem, probably on the mysqueezebox server, caused a sudden reboot of the radio a few days ago. This reboot message was visible on the radio display with the request to send a failure report (which I did!). The radio was working again properly after the reboot, but no artwork was present from that moment, and in some cases the last displayed artwork just before the network problem occurred (logo of a particular Dutch station) pops up instead of the default radio tower which is now standard visible on almost all radio stations! However, some radio stations still show the artwork!!! The following radio stations show the album sleeve of the artist playing instead of the antenna tower (or Dutch station) logo!!! Sometimes the ‘Dutch logo’ is initially present on these stations just after tuning to it, and the correct logo appears after a while when a new song is played which means that the artwork is updated with new information from the radio stream: http://opml.radiotime.com/Tune.ashx?id=s53120&partnerId=16 (SKY.FM Alt Rock (US)) http://opml.radiotime.com/Tune.ashx?id=s111849&partnerId=16 (Psychedelic Jukebox) The following radio station has a ‘static’ logo, but that one has been replaced with the radio tower logo (no Dutch logo present at all, always the tower): http://opml.radiotime.com/Tune.ashx?id=s2611&partnerId=16 (VRT Studio Brussel) So I am dealing with three different scenarios: (1) tower logo OR the ‘fixed’ logo of a Dutch radio station, (2) proper artwork (actively updated when a new song is played), and (3) the antenna logo always displayed….. I wonder what information in the radio stream is corrupted. Is there a way in which the radio stream is passing a kind of filter (probably on the mysqueezebox server) which matches the serial number/account information/firmware version of my radio? Some owners do have two SR radios, of which one is affected by this bug, and the other one is not). In that case the problem can be fixed (or introduced) by synchronizing the bad one to the good one and vice versa. This make me think of a problem that is NOT in the radio itself (re-installing of the firmware does not fix it) and might be present in the ‘grey area’ between the radio station and the individual radios. I hope that this information will help in fixing this annoying problem! I hope for a quick solution! Best regards from The Netherlands, Tom ------------------------------------------------------------------------ tomsat50's Profile: http://forums.slimdevices.com/member.php?userid=56916 View this thread: http://forums.slimdevices.com/showthread.php?t=96043 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
