Thanks for the expertise offered - obviously much greater than mine. I've now tried connecting with encryption switched off but still no effect. I tried manually connecting to my network name (SSID) with no encryption, WPA and WPA2 (with encryption on), but nothing.
Encryption information is as follows (from router info): "Security mode: WPA-PSK+WPA2-PSK. Encryption mode: TKIP+AES". The router shows all devices that have been connected and highlights those currently connected. The radio now shows as connected (now by cable) but the controller isn't. The LMS computer is connected by Ethernet cable to the router but LMS has not been running. It made no difference when I enabled it. The router info shows "2.4 GHz Transmission mode: 802.11b/g//n Channel: Auto. 5 GHz Transmission mode: 802.11a/n/ac" Channel: Auto. I can't now try diagnostics on the controller, Since I reset it, it will only let me try to connect to a network. As I can't do that, it's completely useless. If I try diagnostics on the radio and select "Wireless Info", it just shows as "Not connected" - and, of course it won't connect. As I said earlier, it shows my network name, but shows no signal strength. I'm fairly sure that is what the controller showed before I reset it. -"Another idea ping them or connect to them with ssh"- How do I do that? I have now been in contact with TalkTalk but they were no use at all. I was just told they couldn't help because it was a Squeezebox issue. Geoff ------------------------------------------------------------------------ GeoffK's Profile: http://forums.slimdevices.com/member.php?userid=63657 View this thread: http://forums.slimdevices.com/showthread.php?t=104523 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
