OK dunno if it's corrected in 0.5.1 but got an issue in 0.5.0
Seems the scripts restarted at 22:55
Code:
--------------------
wlanpoke 0.5.0 9/18/2020
Running as 720
2020-09-19T22:55:14+0200 Stopping and restarting wlan...
..unloading all
Setting eth1 macaddr: 00:04:20:2C:36:4F
Load Board Data from /lib/atheros/calData_ar6102_15dBm.bin
Updating MAC address
BMI Write Memory (address: 0x502400, filename: /lib/atheros/athwlan.bin)
BMI Write Memory (address: 0x52d8bc, filename:
/lib/atheros/data.patch.hw2_0.bin)
BMI Write Memory (address: 0x500418, value: 0x52d8bc)
BMI Bit-Wise (OR) modify Register (address: 0x500410, orig:0x0, new: 0x1,
mask:0x1)
BMI Done
Restarting dhcp
udhcpc (v1.18.2) started
Sending discover...
Performing a DHCP renew
Sending discover...
Sending select for 192.168.1.54...
Lease of 192.168.1.54 obtained, lease time 86400
adding dns 192.168.1.1
2020-09-19T22:55:29+0200 Waiting for successful ping...
--------------------
And it seems it worked beacause the Radio is responding.
But I have a huge wlanerr.log of 3 MB, with a new line every 2/3 secs
Code:
--------------------
2020-09-20T12:44:22+0200 Marlin failed reset 2020-09-19T22:55:14+0200 up
2020-09-19T22:55:29+0200 eth1 AR6000 802.11g ESSID:"SynGom" Mode:Managed
Frequency:2.462 GHz Access Point: 00:11:32:72:5F:59 Bit Rate=54 Mb/s
Tx-Power=15 dBm Sensitivity=0/3 Retry:on Encryption key:off Link Quality:25/94
Signal level:-70 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:15
Rx invalid frag:0 Tx excessive retries:29 Invalid misc:0 Missed beacon:0 PING
192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: seq=0
ttl=64 time=2.943 ms --- 192.168.1.1 ping statistics --- 1 packets transmitted,
1 packets received, 0% packet loss round-trip min/avg/max = 2.943/2.943/2.943 ms
2020-09-20T12:44:25+0200 Marlin failed reset 2020-09-19T22:55:14+0200 up
2020-09-19T22:55:29+0200 eth1 AR6000 802.11g ESSID:"SynGom" Mode:Managed
Frequency:2.462 GHz Access Point: 00:11:32:72:5F:59 Bit Rate=54 Mb/s
Tx-Power=15 dBm Sensitivity=0/3 Retry:on Encryption key:off Link Quality:25/94
Signal level:-70 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:15
Rx invalid frag:0 Tx excessive retries:29 Invalid misc:0 Missed beacon:0 PING
192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: seq=0
ttl=64 time=8.293 ms --- 192.168.1.1 ping statistics --- 1 packets transmitted,
1 packets received, 0% packet loss round-trip min/avg/max = 8.293/8.293/8.293 ms
2020-09-20T12:44:28+0200 Marlin failed reset 2020-09-19T22:55:14+0200 up
2020-09-19T22:55:29+0200 eth1 AR6000 802.11g ESSID:"SynGom" Mode:Managed
Frequency:2.462 GHz Access Point: 00:11:32:72:5F:59 Bit Rate=54 Mb/s
Tx-Power=15 dBm Sensitivity=0/3 Retry:on Encryption key:off Link Quality:26/94
Signal level:-69 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:15
Rx invalid frag:0 Tx excessive retries:29 Invalid misc:0 Missed beacon:0 PING
192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: seq=0
ttl=64 time=35.303 ms --- 192.168.1.1 ping statistics --- 1 packets
transmitted, 1 packets received, 0% packet loss round-trip min/avg/max =
35.303/35.303/35.303 ms
2020-09-20T12:44:30+0200 Marlin failed reset 2020-09-19T22:55:14+0200 up
2020-09-19T22:55:29+0200 eth1 AR6000 802.11g ESSID:"SynGom" Mode:Managed
Frequency:2.462 GHz Access Point: 00:11:32:72:5F:59 Bit Rate=54 Mb/s
Tx-Power=15 dBm Sensitivity=0/3 Retry:on Encryption key:off Link Quality:26/94
Signal level:-69 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:15
Rx invalid frag:0 Tx excessive retries:29 Invalid misc:0 Missed beacon:0 PING
192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: seq=0
ttl=64 time=5.020 ms --- 192.168.1.1 ping statistics --- 1 packets transmitted,
1 packets received, 0% packet loss round-trip min/avg/max = 5.020/5.020/5.020 ms
2020-09-20T12:44:33+0200 Marlin failed reset 2020-09-19T22:55:14+0200 up
2020-09-19T22:55:29+0200 eth1 AR6000 802.11g ESSID:"SynGom" Mode:Managed
Frequency:2.462 GHz Access Point: 00:11:32:72:5F:59 Bit Rate=54 Mb/s
Tx-Power=15 dBm Sensitivity=0/3 Retry:on Encryption key:off Link Quality:26/94
Signal level:-69 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:15
Rx invalid frag:0 Tx excessive retries:29 Invalid misc:0 Missed beacon:0 PING
192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: seq=0
ttl=64 time=6.277 ms --- 192.168.1.1 ping statistics --- 1 packets transmitted,
1 packets received, 0% packet loss round-trip min/avg/max = 6.277/6.277/6.277 ms
2020-09-20T12:44:36+0200 Marlin failed reset 2020-09-19T22:55:14+0200 up
2020-09-19T22:55:29+0200 eth1 AR6000 802.11g ESSID:"SynGom" Mode:Managed
Frequency:2.462 GHz Access Point: 00:11:32:72:5F:59 Bit Rate=54 Mb/s
Tx-Power=15 dBm Sensitivity=0/3 Retry:on Encryption key:off Link Quality:26/94
Signal level:-69 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:15
Rx invalid frag:0 Tx excessive retries:29 Invalid misc:0 Missed beacon:0 PING
192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: seq=0
ttl=64 time=2.955 ms --- 192.168.1.1 ping statistics --- 1 packets transmitted,
1 packets received, 0% packet loss round-trip min/avg/max = 2.955/2.955/2.955 ms
--------------------
Any clue ?
Concerning WinSCP
1 . Install
2 : Launch, in login choose protocol SCP, use to correct ip address user
root pass 1234
3 : Answer yes to the 2 questions the questions
4 : Enjoy
Hope it helps,
3162331624
+-------------------------------------------------------------------+
|Filename: winscp2.png |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=31624|
+-------------------------------------------------------------------+
------------------------------------------------------------------------
gomi's Profile: http://forums.slimdevices.com/member.php?userid=65458
View this thread: http://forums.slimdevices.com/showthread.php?t=111663
_______________________________________________
Radio mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/radio
