Hello, Thanks for all the comments.
OK I've done a few more tests: i) Radio No 3 now running , but no reboots as yet , but have seen buffering / silence for a few seconds..? ii) I've taken the mains adapter from Radio No 2 which has definitely rebooted whilst listening to LBC radio. Solid 18V measured on the DC jack plug. I've then loaded with an artificial resistive load 20R , close to 1A load. That's nearly 20 Watts! and they get warm too. Measured voltage a solid 17.8V which I reckon is pretty good. OK only measured on a mulitmeter. Admittedly not dynamic testing but a good first pass to check. I'd have to say based on this measurement I don't think the power supply is the issue and think we should eliminate as a the cause. As I've at least 2 radios that do this , it's looking unlikely in my eyes. iii) A an app on my Android phone (RaspController) allows me to see the percentage of CPU activity on my Raspberry Pi/Squeezeserver when listening to the Squeezebox radio or using the Touch units. With LBC running there's a approx. 1% activity. So doesn't indeed looks as if its involved. So my thoughts are in no specific order (a) Its a firmware issue on the Radio decoding this type of station/stream (b) Its a ISP / networking / router issue (c) It's a hardware/design fault as common to more than one example (less likely) (d) Something else not yet identified ? I've starting to favour (a) or (b) above but not sure how to home in. I'd guess another brand/device tuned to the same URL. Any new thoughts ? ------------------------------------------------------------------------ bayard1music's Profile: http://forums.slimdevices.com/member.php?userid=51497 View this thread: http://forums.slimdevices.com/showthread.php?t=113309 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
