POMdev wrote: > Sorry for the long delay in answering. I believe the word "failed" is > transmitted twice to ncat (and the radio's local log file). The first > entry goes into the local log at the failure time (but of course cannot > be transmitted). This is used when troubleshooting with a local hard > wired serial connection. The second is part of an incident report logged > and transmitted to ncat immediately after the initial failure report. > > Read through the wlanpoke.sh shell file. If you want, you can add a key > word to search for to the initial failure report. Otherwise, divide by > 2. The first report timestamp is the time of failure, but the second > report shows all the important times for analysis, followed by the > multiple network connection status reports every 2 seconds just prior to > the failure. You can make an app to display a real time time line graph > of the various failures, this might be very interesting.
Thanks for your interest @POMdev. I have just finished a proper log rotation and plotting some graphs. My draft code is in a python notebook at: https://github.com/castorfou/squeezebox_wlanpoke_plot/blob/main/1%20-%20EDA.ipynb Here is an example of plot. I will now try to adjust settings on my wifi router just to monitor effects on the plot. +-------------------------------------------------------------------+ |Filename: fails per hour.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=32502| +-------------------------------------------------------------------+ ------------------------------------------------------------------------ castor_fou's Profile: http://forums.slimdevices.com/member.php?userid=67321 View this thread: http://forums.slimdevices.com/showthread.php?t=97791 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
