Tony T wrote: > Yes. Cant tape over the case as its the vent... > ....but, the case is press fit. Easy to pop open and place a small > piece of electrical tape directly over the LED.
I tried it with the Vonets VAP11G-300 and the VAP11N-300. For the G version it worked well, however you have to use multiple layers of tape. for the N version it was less successful as there is little space to cover with the tape and there is a lot of indirect scattering of light. Amazing how much light these micro LEDs can emit... For all who are interested, the instructions I noted for myself: VAP11G-300 / VAP11G-500: - Open the two parts using a scissor or screwdriver from the front-end (away from the cables) - Put 4 Layers of Tape (Panzerband) onto the two diodes. - Put the board into the half with the reset button, ensure that the cables fit - press the board with a screw-driver versus the back (cables / reset button) while closing the case starting at the back VAP11N-300 - not as effective as VAP11G-300 - Open the two parts using a scissor or screwdriver from the front-end (away from the cables) - Put 4 Layers of Tape (Panzerband) onto the two diodes. - Close the case starting from the back (cables) ------------------------------------------------------------------------ frankd's Profile: http://forums.slimdevices.com/member.php?userid=52885 View this thread: http://forums.slimdevices.com/showthread.php?t=109953
_______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
