POMdev wrote: > An update to the mitigation script wlanpoke is available on the GitHub > 'development branch' > (https://github.com/PomDev2/wlanpoke/tree/development). It has a lot of > changes to accommodate low signal levels, better reports and logging, > switching between Wlan and Ethernet, etc. Other than reinstatement of a > reliable "quick reset" method, this is more or less feature complete. > The 7 radios here seem ok with it, but the environment has been quiet > lately, and this needs testing under more fierce conditions before it is > more generally offered in the main branch or as a release. Thanks for > your input.
oke i have tested it but: this is the result: Squeezebox Radiok wlanpoke.sh 0.8.3.4 4/2/2021 launched 2021-04-07_16:46:28 Options: -W slow -Wp 8080 logging to -W slow -Wp 8080 Wed Apr 7 16:51:26 CEST 2021 ( 16:51:27 up 1:50, load average: 2.14, 1.33, 1.07 ) eth1 AR6000 802.11g ESSID:"hop1" Mode:Managed Frequency:2.432 GHz Access Point: 3C:7C:3F:DB:7A:E9 Bit Rate=36 Mb/s Tx-Power=15 dBm Sensitivity=0/3 Retry:on Encryption key:off Link Quality:30/94 Signal level:-65 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1 Invalid misc:0 Missed beacon:0 wlanpoke test settings (s,q,f) and failed pings [0..n] prior to recovery recent AP scan results the "wlanpoke test settings" there is nothing to see ------------------------------------------------------------------------ cb4kda's Profile: http://forums.slimdevices.com/member.php?userid=69658 View this thread: http://forums.slimdevices.com/showthread.php?t=111663 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
