I have a situation in which my Radio display never times out, so the screensaver never appears.
Specifics: The Radio was sold as a UE Smart Radio, but shortly after acquisition it was UPgraded to Squeezebox Radio firmware. Still with firmware 7.7.3-r16676. I rarely use the Radio as a player. It's my bedside clock, and I use it to control another player in the bedroom, an Airplay speaker connected to LMS through the Airplay bridge, which is usually synchronized with other players using the Group Players plugin. All three screensavers are set to "Digital Clock (Black)" and the delay is ten seconds. When the Airplay speaker starts playing, the Radio displays its Now Playing screen, but it never times out and returns to the screensaver until the Airplay speaker stops playing, unless I press the Home button on the Radio or a remote. Any ideas how I might correct this behavior or automate the button press? I thought about using the cli "button" command, but after some failed experimentation I searched this forum and found that the command is largely incompatible with the Radio. I have a script running on the Pi running LMS that can detect when music starts playing, and it is communicating with the LMS cli via telnet, so if there is a command that would serve this purpose, it should be a simple matter to implement it. It should also be easy enough to ssh into the Radio, if there is a local command that would do the job. Suggestions will be appreciated! Usually running latest beta LMS nightly on Raspberry Pi OS with virtual players (Squeezelite and Airplay bridge). Occasionally using SB Radio, Boom or Classic. ------------------------------------------------------------------------ RobbH's Profile: http://forums.slimdevices.com/member.php?userid=67008 View this thread: http://forums.slimdevices.com/showthread.php?t=117148 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
