Thu, Jan 04, 2018 at 01:38:15PM -0800, Azher: > Hi Heasley, > > [rancid@rancid ~]$ rivrancid -d -t enterasys cal-7100-1 > executing rivlogin -t 90 -c"system show uptime;system show version;system > show hardware;system show active-config" cal-7100-1 > cal-7100-1: missed cmd(s): all commands > cal-7100-1: End of run not found > cal-7100-1: clean_run is false > > These commands starting with "system" does not work on the Enterasys > switches.
is it an oem of someone else's box? or a completely new enterasys o/s? > Thanks > -Azher > > > > On Tue, Jan 2, 2018 at 3:27 PM, heasley <h...@shrubbery.net> wrote: > > > Thu, Dec 28, 2017 at 06:08:57PM -0800, Azher: > > > Hi Chris, > > > > > > I added following lines in the "rancid.types.base " otherwise there is > > just > > > a reference of enterasys to rivrancid. > > > > > > enterasys;script;xrancid > > > enterasys;login;xlogin > > > enterasys;command;enterasys::ShowVersion;show version > > > enterasys;command;enterasys::WriteTerm;show config > > > > you should not need that; there is already an entry in rancid.types.base > > for this device type - use that. > > > > > Running in debug mode: > > > > > > [rancid@rancid ~/etc]$ rancid -d -t enterasys cal3-n7 > > > loadtype: device type enterasys > > > loadtype: found device type enterasys in /opt/rancid/etc/rancid.types. > > base > > > loadtype: undefined function in enterasys: enterasys::ShowVersion > > > Couldn't load device type spec for enterasys > > > > > > I am not sure why it is complaining because xrancid does have this > > function > > > defined: > > > > > > # This routine parses "show version" > > > sub ShowVersion { > > > print STDERR " In ShowVersion: $_" if ($debug); > > > > > > And in the main routine: > > > > > > # Main > > > @commandtable = ( > > > {'show version' => 'ShowVersion'}, > > > ### {'show memory' => 'ShowMemory'}, > > > ### {'show diag' => 'ShowDiag'}, > > > ### {'show switch' => 'ShowSwitch'}, > > > ### {'show slot' => 'ShowSlot'}, > > > # way too confusing {'show configuration detail' => 'WriteTerm'}, > > > {'show config' => 'WriteTerm'}, > > > ); > > > > > > Trying rivrancid also complains about no commands: > > > > > > [rancid@rancid ~]$ rivrancid -d cal3-n7 > > > executing rivlogin -t 90 -c"system show uptime;system show version;system > > > show hardware;system show active-config" cal3-n7 > > > > manually run the rivlogin command that is there to see if there is a > > failure in that login script. > > > > > cal3-n7: missed cmd(s): all commands > > > cal3-n7: End of run not found > > > cal3-n7: clean_run is false > > > ! > > > > > > Thanks > > > -Azher > > > > > > > > > > > > > > > On Thu, Dec 28, 2017 at 2:39 PM, Gauthier, Chris <cgauth...@comscore.com > > > > > > wrote: > > > > > > > I would take a look at the rancid types file to make sure it’s running > > the > > > > commands you need. It seems like it’s throwing up in the very > > beginning of > > > > its run. > > > > > > > > > > > > > > > > There are several emails in the list on how to get into a “debugging” > > mode > > > > if you’re not already familiar. That will help completely isolate the > > > > issue. > > > > > > > > > > > > > > > > --Chris > > > > > > > > > > > > > > > > > > > > Chris Gauthier Senior Network Engineer | comScore, Inc. > > > > t +1 *(503) 331-2704* <(503)%20331-2704> | > > > > *cgauth...@comscore.com* <cgauth...@comscore.com> > > > > 317 > > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2% > > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2% > > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g> > > > > SW > > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2% > > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2% > > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g> > > > > Alder > > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2% > > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2% > > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g> > > > > Street, > > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2% > > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2% > > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g> > > > > Suite > > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2% > > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2% > > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g> > > > > 700 > > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2% > > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2% > > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g> > > > > | > > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2% > > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2% > > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g> > > > > Portland, > > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2% > > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2% > > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g> > > > > OR > > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2% > > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2% > > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g> > > > > 97204 > > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2% > > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2% > > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g> > > > > United > > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2% > > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2% > > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g> > > > > States > > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2% > > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2% > > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g> > > > > *comscore.com* <http://www.comscore.com/> > > > > This e-mail (including any attachments) may contain information > > that is > > > > private, confidential, or protected by attorney-client or other > > privilege. > > > > If you received this e-mail in error, please delete it from your > > system and > > > > notify sender. > > > > > > > > > > > > *From: *Rancid-discuss <rancid-discuss-boun...@shrubbery.net> on > > behalf > > > > of Azher <azhera...@gmail.com> > > > > *Date: *Thursday, December 28, 2017 at 2:26 PM > > > > *To: *"rancid-discuss@shrubbery.net" <rancid-discuss@shrubbery.net> > > > > *Subject: *[rancid] Enterasys Switches help > > > > > > > > > > > > > > > > Hi All, > > > > > > > > I have a large deployment of different Enterasys switches > > > > (S,K,B,C,D,7100). It seems rancid is not happy with these switches > > somehow. > > > > > > > > > > > > > > > > clogin to the same device successfully logs into the switch and gives > > > > prompt and I can type the commands. > > > > > > > > > > > > > > > > When trying "rancid-run -r cal3-n7", the log file throws this error: > > > > > > > > > > > > > > > > [rancid@rancid ~/var/logs]$ tail -f extreme.20171228.113653 > > > > > > > > starting: Thu Dec 28 11:36:53 PST 2017 > > > > > > > > Trying to get all of the configs. > > > > > > > > cal3-n7 xlogin error: Error: Unknown: "terminal" > > > > cal3-n7: missed cmd(s): show version,show config > > > > cal3-n7: End of run not found > > > > # > > > > ===================================== > > > > Getting missed routers: round 1. > > > > cal3-n7 xlogin error: Error: Unknown: "terminal" > > > > cal3-n7: missed cmd(s): show version,show config > > > > cal3-n7: End of run not found > > > > # > > > > All routers successfully completed. > > > > > > > > cvs diff: Diffing . > > > > cvs diff: Diffing configs > > > > cvs commit: Examining . > > > > cvs commit: Examining configs > > > > --------------- > > > > > > > > Here is the config section: > > > > [rancid@rancid ~/var/extreme]$ more router.db | grep cal3-n7 > > > > cal3-n7;enterasys;up > > > > > > > > # Extreme Switches > > > > add user cal3-n7 admin > > > > add autoenable cal3-n7 1 > > > > add password cal3-n7 xxxxxxxxxxxx > > > > add method cal3-n7 ssh > > > > > > > > I have gone through some of the scripts which are in the mailing list, > > > > tried them, but no luck. > > > > > > > > > > > > > > > > Any one has experience with Enterasys devices ? Any working scripts > > would > > > > greatly help. > > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > -Azher > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Rancid-discuss mailing list > > > Rancid-discuss@shrubbery.net > > > http://www.shrubbery.net/mailman/listinfo/rancid-discuss > > > > _______________________________________________ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss