*New software:* Victoria-Switch1# show tech transceivers Cmd Info : show tech transceivers
transceivers Transceiver Technical Information: Port # | Type | Prod # | Serial # | Part # -------+-----------+------------+------------------+---------- show time Mon Jan 15 09:52:26 2018 === The command has completed successfully. === Victoria-Switch1# *Old software:* Victoria-Switch1# show tech transceivers transceivers Transceiver Technical Information: Port # | Type | Prod # | Serial # | Part # -------+-----------+------------+------------------+---------- === The command has completed successfully. === Victoria-Switch1# On 15 January 2018 at 09:22, heasley <[email protected]> wrote: > Sun, Jan 14, 2018 at 11:34:04PM +0100, Kevin Olbrich: > > Hi! > > > > With WB_16_05_0004 from december, HP switches will enter backup config > loop > > because output of "show tech transceivers" now shows the current time: > > > > ;Cmd Info : show tech transceivers > > > ;transceivers > > > ;Transceiver: > > > ; Port # | Type | Prod # | Serial # | Part # > > > ; -------+-----------+------------+------------------+---------- > > > ; A1 | SFP+DA1 | J9281B | CN5AFRM134 | 8121-1300 > > > ; A2 | SFP+DA1 | J9281B | CN5AFRM0WP | 8121-1300 > > > ;show time > > > ;Sun Jan 14 23:20:16 2018 > > > ;=== The command has completed successfully. === > > > > > > How can I fix this in rancid? It would be possible to disable this output > > in "hrancid.in" but this is no solution (HP might add timestamp to all > > outputs). > > Would you show me the output of this command, from the prompt with the > command to the following prompt and including the prompts? or the > output of > hrancid -c 'show tech transceivers' hostname > > _______________________________________________ > Rancid-discuss mailing list > [email protected] > http://www.shrubbery.net/mailman/listinfo/rancid-discuss >
_______________________________________________ Rancid-discuss mailing list [email protected] http://www.shrubbery.net/mailman/listinfo/rancid-discuss
