On 16/05/18 14:50, o...@leferguson.com wrote:
If you post a snippet of config, somebody might recognise what ODM makes the
switches.
Sure, thanks. The login is
User:
Password:
The not-enabled prompt is the model in parenthesis
(M4100-26G) >
The enable prompt (no password required, at least as we are set up):
(M4100-26G) #
A "terminal length 0" will disable paging or the prompt looks like " --More-- or
(q)uit".
The config is exceptionally cisco-like, here's one redacted a bit:
!Current Configuration:
!
!System Description "M4100-26G ProSafe 24-port Gigabit L2+ Intelligent Edge Managed
Switch, 10.0.2.26, B1.0.1.1"
!System Software Version "10.0.2.26"
!System Up Time "0 days 15 hrs 57 mins 20 secs"
!Additional Packages QOS,IPv6 Management,Routing
!Current SNTP Synchronized Time: SNTP Client Mode Is Disabled
Looks a lot like a Ubiquiti EdgeMAX so presumably Ubiquiti and Netgear
are buying the design from the same place.
You're in luck:
# edgemax.pm - Ubiquity ("UBNT") EdgeMAX switch rancid procedures
alexd
_______________________________________________
Rancid-discuss mailing list
Rancid-discuss@shrubbery.net
http://www.shrubbery.net/mailman/listinfo/rancid-discuss
