On Sat, Aug 4, 2018 at 12:57 PM, Chris Wopat <m...@falz.net> wrote: > On Fri, Aug 3, 2018 at 3:49 PM, heasley <h...@shrubbery.net> wrote: > > does the patch below do it? I no longer have any of these devices. >> >> > I applied ran, no changes at all. Should it be scrubbing the power value > out of the config? >
Rechecked logs, it was actually giving an error and not running properly, changed "$PSW" to "my $PSW" to get it to run. This took care of half of the problem- it did filter out the "CHASSIS POWER SUMMARY" box, but there's still a power value in the new last column of "POWER SUPPLY STATUS" box. ! +------------------------------------ POWER SUPPLY STATUS ---------------------------------------+-----------+ ! | Slot | Admin | Oper | Type | Model | Serial Number | Part Number / Rev | Power (W) | ! +--------+----------+--------+---------+------------------+---------------+----------------------+-----------+ ! | PSU-1 | Enabled | Normal | DC | WS DC PSU | blah | 186-1501-900/AB | 256.0 | ! +--------+----------+--------+---------+------------------+---------------+----------------------+-----------+ ! | PSU-2 | Enabled | Normal | DC | WS DC PSU | blah | 186-1501-900/AB | 314.0 | ! +--------+----------+--------+---------+------------------+---------------+----------------------+-----------+
_______________________________________________ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss