Wed, Oct 31, 2018 at 09:10:27AM +0100, Service Informatique CH DECIZE: > We have made a clogin test : > " > > > > > > > > > > > > > > > > > > > > > *rancid@SRV-TOOLS2:/usr/lib/rancid/bin$ ./clogin SWA22swa22spawn telnet -K > swa22Trying 172.16.1.22...telnet: Unable to connect to remote host: > Connection refusedspawn ssh -c aes128-cbc -x -l admin swa22admin@swa22's > password: <SWA22><SWA22>exitConnection to swa22 > closed.rancid@SRV-TOOLS2:/usr/lib/rancid/bin$ ./clogin SWA21swa21spawn > telnet -K swa21Trying 172.16.1.21...Connected to swa21.ch-decize.fr > <http://swa21.ch-decize.fr>.Escape character is '^]'.Login > authenticationUsername:adminPassword:<SWA21><SWA21>quitConnection closed by > foreign host.rancid@SRV-TOOLS2:/usr/lib/rancid/bin$ *" > > SWA22, as SWSR1, is a router for which we receive "config fetcher problems" > mails... > SWA21 is a router for which we have no problem. > SWA22 clogin test shows a first telnet connexion refused. It's perhaps the > origin of our problem ?
we do not support that module; ask whomever wrote it. but, my guess would be that the cause is that the device appears to not reliably echo the <CR> after 'exit' and the loop around input must be adjusted to accept that, as the ios module does. i do not know the hp 5130; you might try the hp, foundry, or smc device types that rancid supports. > Thanks for your help. > > > Le mer. 31 oct. 2018 à 08:44, Service Informatique CH DECIZE < > serv.informatique....@gmail.com> a écrit : > > > We use cmw device type (before and after upgrade)... > > No modification in the rancid config. Just routers firmware upgrade. > > > > > > Le mar. 30 oct. 2018 à 16:40, heasley <h...@shrubbery.net> a écrit : > > > >> Tue, Oct 30, 2018 at 12:02:09PM +0100, Service Informatique CH DECIZE: > >> > Hello, > >> > > >> > We have made a firmware update on our cwm / hp 5130 routers : upgrade > >> from > >> > 3115P05 release (7.1.045) to 3208P03 release (7.1.070). > >> > Since upgrade, we receive "config fetcher problems" mails, that > >> indicates " The > >> > following routers have not been successfully contacted for more than 24 > >> > hours". > >> > In the rancid logs, we can see for these routers : > >> > " Trying to get all of the configs. > >> > swsr1: End of run not found > >> > return > >> > ========================================= > >> > Getting missed routers: round 1. > >> > swsr1: End of run not found > >> > return > >> > ... " > >> > Does anyone know where is the problem ? > >> > Before upgrade, everything was ok with these routers in rancid. > >> > >> what device type are you using for these? It looks like you are using a > >> older version of rancid or have a custom module? > >> > > _______________________________________________ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss