Hi Enrico,I am facing problems with D-Bus service.
1. Error creating proxy: Error calling StartServiceByName for
de.pengutronix.rauc: Timeout was reached
> D-Bus error while installing `/home/rauc/update.raucb2.How to start D-Bus
> service and run rauc in Daemon mode.3.Please start some IRC chat so we can
> get live help from your team.
Regards
Gurpartap SinghEmbedded Software EngineerTerron Microsystems Pvt. LtdNew Delhi
On Monday, 13 March 2017 9:38 PM, Enrico Joerns <[email protected]> wrote:
Hi,
On 03/09/2017 12:13 PM, gurpartap singh wrote:
> I installed RAUC with --disable-network option because of libcurl dependency
> issues.
> I have done below steps so far:
> Created manifest.raucm like this
> [update]
> compatible=rauc-demo-x86
> version=2015.04-1
>
> [image.rootfs]
> sha256=4c03d5be6780e64a604e94222a2da50e671698b9c1d764f1bbc617558de80f98
> size=11376640
> filename=rauc.img
this one looks ok.
> MY /etc/rauc/system.conf is:
>
> [system]
> compatible=rauc-demo-x86
> bootloader=uboot
> mountprefix=/mnt/rauc
>
>
> [slot.rootfs.0]
> device=/dev/mmcblk0p1
> type=raw
> bootname=A
this one will require a second rootfs partition to allow you installing
updates when running from the productive one.
> But when I try to install this update using:
> ./rauc install -d update.raucb
> it shows following log:
> Domains: 'rauc'
> (rauc:21307): rauc-DEBUG: install started
> (rauc:21307): rauc-DEBUG: input bundle: /home/rauc/update.raucb
> Error creating proxy: Error calling StartServiceByName for
> de.pengutronix.rauc: Timeout was reached
> D-Bus error while installing `/home/rauc/update.raucb`
There seems to be a communication issue between the command line client
and the service. Did you try to start the service. Do you have the d-bus
config installed? Could you get any log data from the service itself?
> Previously I have done:
> ./autogen.sh
> ./configure --disable-network
> make
> make install
>
> service rauc start
This looks ok so far.
> LOG of
> ./rauc info -d update.raucb
> Domains: 'rauc'
> rauc-Message: Reading bundle: update.raucb
> rauc-Message: Verifying bundle...
> 3069734912:error:2E09D06D:CMS routines:CMS_verify:content verify
> error:../crypto/cms/cms_smime.c:393:
>
> (rauc:21318): rauc-WARNING **: signature verification failed:
> error:2E09A09E:CMS routines:CMS_SignerInfo_verify_content:verification failure
I assume you executed this on the target?
Obviously, there is a certificate verification error. Did you set up the
key, cert and keychain correctly? If you want to (for test-purpose)
inspect the bundle without verification, you can use the `--no-verify`
argument. But for installation the verification is mandatory thus it
should work with `info`, too.
>
> QUESTION 2:
> How to use it with uboot? Can u please elaborate how to install library to
> modify u-boot variables and environment.
In the documentation there is the chapter `Interfacing with the bootloader`:
http://rauc.readthedocs.io/en/latest/integration.html#interfacing-with-the-bootloader
Did you already try what is described in there? If there is some
information missing please let us know. The subsection "U-Boot" also
points you to the u-boot example script located in the `contrib/`
folder. This should be a good starting point.
Best regards
Enrico
--
Pengutronix e.K. | Enrico Jörns |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-5080 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
RAUC mailing list
_______________________________________________
RAUC mailing list
