I try to update the U-Boot Loader on two different partitions. /dev/mmcblk3boot0 /dev/mmcblk3boot1
A restriction on our i.Mx6 platform is location of the u-boot entry on the partition. Offset: 1024 Byte Address: 0x400 So a raw copy would start at address 0x00, but we have to start 0x400 for the entry point. Does rauc provides any options to customize the startaddress for a raw copy/install of a binary file (u-boot binary)? I have took a look into the source code, but found out, that there is no option to customize the default offset address for a write on a partition. Could you provide some help in this case? _______________________________________________ RAUC mailing list
