Hi, Hello !,
I will be using RAUC for integration with NAND flash. I have the exact same error as shown in the following post: Solved: Re: After writing ubifs and booting into Linux bad nodes are found - NXP Community<https://community.nxp.com/t5/i-MX-Processors/After-writing-ubifs-and-booting-into-Linux-bad-nodes-are-found/m-p/1263666/highlight/true> Unfortunately using the solution from this post will not help me . Reason being that RAUC requires a UBIFS to be written into the slot. According to this solution I need to reflash the ubi partition with the correct UBIFS image from either an SD-card of TFTPBOOT. Is there a way I can still integrate RAUC with the above solution ? If not is there a pre-execution script or a function which I can override to attach my custom script which copies data to the UBI partition? Regards, Nachiket Bapat Nachiket Bapat Embedded Software Developer R&D Hardware & Firmware Phone: +49 9287 91918 73 <tel:+49%209287%2091918%2073> Mobile: / <tel:/> Email: [email protected] <mailto:[email protected]> NETZSCH Process Intelligence GmbH Schwanthalerstra?e 32 80335 M?nchen, Germany [cid:logosensxpertsignatur_1b032eb6-3075-4a53-94f0-61d6688ee9b6.png] NETZSCH Process Intelligence GmbH * Gebr?der-Netzsch-Stra?e 19 * 95100 Selb * Germany Registergericht: Amtsgericht Hof/Saale * Registernr.: HRB 6370 * Sitz der Gesellschaft: Selb * Ust.ID. DE345465868 Gesch?ftsf?hrer: Dr. Alexander Chaloupka
