Hi All,
I've been using Razor for some time on my home system, but decided to
implement it at work as well. I'm running into some problems which
have probably already been solved by many of you, so I'm looking for
some advice.
Our network is setup in this way:
Outside (Internet) <--> Firewall <--> Mail Server
The firewall really doesn't do anything other than forward, back and
forth. In addition, I run squid on the firewall, which works very well.
I would prefer to install Razor into the pre-existing SpamAssassin,
MailScanner, and ClamAV setup on the Mail Server, NOT on the Firewall.
I have razor installed, but when I run "razor-admin -create", I get
these messages in the log file:
Apr 17 16:33:49.219842 check[8841]: [ 2] Razor-Agents v2.40 starting
razor-check ./anthony
Apr 17 16:34:11.584514 check[8841]: [ 3] Unable to connect to
66.151.150.11:2703; Reason: Operation now in progress.
Apr 17 16:34:31.594520 check[8841]: [ 3] Unable to connect to
66.151.150.11:2703; Reason: Operation now in progress.
I assume that this is because I am not forwarding / proxying port 2703,
nor port 7.
What software / configuration is recommended for this type of setup?
I attempted a quick trial of simpleproxy on both the firewall and mail
boxes, and I could MANUALLY do a telnet from mail to 66.151.150.11, port
2703. However, razor-admin continued with the same errors.
Any help greatly appreciated.
--Anthony
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Razor-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/razor-users
