You are very welcome, Dennis!
Enjoy the latest and greatest R:BASE X Enterprise!
Razzak
At 10:33 AM 11/14/2016, Hodges, Dennis wrote:
That fixed it. Thanks, Razzak.
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of A. Razzak Memon
Sent: Monday, November 14, 2016 10:29 AM
To: [email protected]
Subject: RE: [RBASE-L] - variables in Watch variables Window
Dennis,
Exit the R:BASE XE session and then run the
c:\RBTI\RBGXE\RBGXE_Default_Settings.exe to
configure R:BASE Default Settings.
If that doesn't help, then let me take a look at your workstation.
Use the following URL for join.me session at https://join.me/RazzakMemon
Razzak
At 10:22 AM 11/14/2016, Hodges, Dennis wrote:
>Razzak,
>
>I tried hovering over the left separator and got the separator move
>cursor. (see watchvar.gif attached)
>
>I collapsed the headers in the error list toolbar and got the column
>size cursor. (see errorlist.gif attached)
>
>-----Original Message-----
>From: [email protected] [mailto:[email protected]] On
>Behalf Of A. Razzak Memon
>Sent: Monday, November 14, 2016 10:10 AM
>To: [email protected]
>Subject: RE: [RBASE-L] - variables in Watch variables Window
>
>Dennis,
>
>You have all your Watch Variables window columns squeezed together on
>the left separator.
>
>Mouse over on the separator on the left and carefully separate each
>column and expand as you see fit.
>
>Razzak
>
>At 10:02 AM 11/14/2016, Hodges, Dennis wrote:
>
> >Razzak,
> >
> >No, I see no column headers. (see attachment)
> >
> >
> >-----Original Message-----
> >From: [email protected] [mailto:[email protected]] On
> >Behalf Of A. Razzak Memon
> >Sent: Monday, November 14, 2016 9:50 AM
> >To: [email protected]
> >Subject: RE: [RBASE-L] - variables in Watch variables Window
> >
> >Dennis,
> >
> >Are you able to see all three columns (Variable Name, Type, Value)
> >under Watch Variables window?
> >
> >See attached image for an example.
> >
> >If not, you may have to adjust/expand column width by simply dragging
> >the column heading divider.
> >
> >Razzak
> >
> >
> >At 09:22 AM 11/14/2016, Hodges, Dennis wrote:
> >
> > >Razzak,
> > >
> > >I have done all of that, but when I select watch variables, the
> > >watch variables window stays blank, not showing anything. If I try
> > >to select them again it says variable is already in the watch list.
> > >
> > >-----Original Message-----
> > >From: [email protected] [mailto:[email protected]] On
> > >Behalf Of A. Razzak Memon
> > >Sent: Monday, November 14, 2016 9:13 AM
> > >To: [email protected]
> > >Subject: Re: [RBASE-L] - variables in Watch variables Window
> > >
> > >Dennis,
> > >
> > >01.
> > >Make sure that the Watch Variables window is enabled.
> > >
> > >Trace Debugger > Main Menu > Layout > Toolbars > Watch Variables
> > >
> > >02.
> > >To watch variable(s) in Trace Debugger, first you need to add
> > >variable(s) to the
> > >list of Watch Variables using the [F6] key or right-click anywhere
> > >in the "Watch Variables"
> > >window and then click on Add/Remove Watch Variable(s).
> > >
> > >Once all desired variables are listed under "Watch Variables"
> > >windows, you should
> > >be able to monitor values, etc.
> > >
> > >Hope that provides you with some blue's clues ...
> > >
> > >Very Best R:egards,
> > >
> > >Razzak
> > >
> > >
> > >At 08:54 AM 11/14/2016, Hodges, Dennis wrote:
> > >
> > > >When I select watch variables when tracing a command file or
> > > >form, my variables don't show up in the Watch Variables window.
> > > >Has anyone else had this problem?
> > > >If so, how do you fix it?
> > > >
> > > >Running version 10.0.2.11010, Windows 7 Enterprise Service Pack 1
> > > >on a Dell OptiPlex 9010
--
You received this message because you are subscribed to the Google Groups
"RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
