The new update fixed it. Mark Lindner Lindner & Associates PO Box 327 Randolph MA 02368 781 247 1100
-----Original Message----- From: [email protected] <[email protected]> On Behalf Of IT Man Sent: Tuesday, October 20, 2020 11:17 AM To: [email protected] Subject: RE: [RBASE-L] - printing to the bypass tray We are also having this problem. For us printing to PDF creates a landscape file with no problems, which can then be printed from there. But printing a landscape file from the R:BASE preview window prints it in portrait by default, and if set to print landscape manually from the print menu, cuts off any information that would not be displayed in portrait. Something else that is also odd is that failing to manually set the print mode from portrait to landscape modifies the Print Preview to become Portrait for the pages printed this way. -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Mark Lindner Sent: Thursday, October 15, 2020 11:26 AM To: [email protected] Subject: RE: [RBASE-L] - printing to the bypass tray I am finding that my reports which have the page setup set to landscape are coming out portrait anyway. I can change them when printing from the print preview screen, but the report loses lines drawn on the form. The lines show on the preview screen but do not make it on the printout when I manually change it to landscape. When I let it print without change the lines are fine but the landscape report comes out portrait. Mark Lindner Lindner & Associates PO Box 327 Randolph MA 02368 781 247 1100 -----Original Message----- From: [email protected] <[email protected]> On Behalf Of A. Razzak Memon Sent: Wednesday, October 14, 2020 12:19 PM To: [email protected] Subject: Re: [RBASE-L] - printing to the bypass tray James, Update blooper, it is! Very Best R:egards, Razzak At 12:50 PM 10/14/2020, 'Jim Belisle' via RBASE-L wrote: >I installed the newest update of RBASE X.5 over the weekend and then >compiled my application. >For years we have used the below code to print a specific report to the >bypass tray and it has worked flawlessly. > > PRINT kprshopwork WHERE transdateoh = .vtransdate ORDER BY control# + > OPTION PRINTER + > |TRAY Multi-purpose TRAY + > |COLLATION OFF + > |COPIES 1 > >Now the report only prints using the default tray rather than the bypass tray. > >I can print the report to the screen and then manually choose the >bypass tray from the properties tab and the report does print to the >bypass tray. >Below is the wording of the bypass tray when I choose the page source >in the properties tab. >[] > > >Anyone have any blues clues as to what I should change? >I have already restarted my computer and that did not help. > >James Belisle -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/1M8yHi-1kVTz43zLa-006AMp%40mrelay.perfora.net. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/MN2PR10MB4317313483B0F77C936545A58F020%40MN2PR10MB4317.namprd10.prod.outlook.com. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/003501d6a6fc%247e12f7b0%247a38e710%24%40trexlerrubber.com. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/MN2PR10MB4317A23AA17B51D8D11AF2318F1F0%40MN2PR10MB4317.namprd10.prod.outlook.com.
