Is your 'PROPERTY' code in the 'tab change eep'?
From: "'Jim Belisle' via RBASE-L" <[email protected]> To: "[email protected]" <[email protected]> Date: Mon, 18 Jan 2021 14:13:38 +0000 Subject: RE: [RBASE-L] - enhanced tab control No. Using the actual table. My ultimate goal is to either do a drag and drop from another control that is on the same tab. Or I may use a varlistview for the other table and do a click to bring rows over to the DBGrid table. I am trying to associate each tab (I will end up with 10 or so tabs) to a diff. number. Then using the drag and drop or click, bring rows over from another table side by side. James Belisle Making Information Systems People Friendly Since 1990 From: [email protected] <[email protected]> On Behalf Of jan johansen Sent: Monday, January 18, 2021 8:08 AM To: 'Jim Belisle' via RBASE-L <[email protected]> Subject: RE: [RBASE-L] - enhanced tab control Jim, Are you using a temp table to display the data in the db-grid? If so, why not just drop the table, and reload it with only the rows you need. Jan From: "'Jim Belisle' via RBASE-L" <[email protected]> To: "[email protected]" <[email protected]> Date: Mon, 18 Jan 2021 13:42:36 +0000 Subject: RE: [RBASE-L] - enhanced tab control Thanks, Jan. I was able to capture the TAB caption just fine. Now for the next step. The tab has an enhanced DBGrid control. I want to filter the information of the DBgrid based upon the caption. On tab change here is the code. (this is successful) GETPROPERTY comp_tab501 CAPTION 'vtabcap' The code below does not change the DBgrid to show JUST the 501 info. PROPERTY comp_501 'FILTERS->COLUMN_NAME->empid' .vtabcap PROPERTY TABLE scheduling 'REFRESH' RETURN I have tried the code using an & in front of the var, without the single quotes on the FILTER section, etc. Nothing changes what the user will see. I want just the 501 info to show. I even tried closing the table then opening it. No change. PROPERTY TABLE scheduling 'CLOSE' PROPERTY TABLE scheduling 'OPEN' James Belisle Making Information Systems People Friendly Since 1990 From: [email protected] <[email protected]> On Behalf Of jan johansen Sent: Monday, January 18, 2021 7:30 AM To: 'Jim Belisle' via RBASE-L <[email protected]> Subject: Re: [RBASE-L] - enhanced tab control CAUTION:This is an EXTERNAL EMAIL, STOP! and think before clicking on any links or opening attachments. Jim, This might be a little hard to explain. You need to assign a componentid to the overall control, which is the EnhancedTab control. Then you need to assign componentid's to the individual tabs in the EnhancedTab control. I think should point you in the right direction. Jan From: "'Jim Belisle' via RBASE-L" <[email protected]> To: "[email protected]" <[email protected]> Date: Mon, 18 Jan 2021 12:42:18 +0000 Subject: [RBASE-L] - enhanced tab control I am using the enhanced tab control for the first time. I want to use the var links editor to capture the tabs caption value. It is also the first time for me to use the links editor. The value of vtabcap is not changing and I get an error saying the var has not been defined. So my questions are: Am I using the links editor properly? Is there a way to capture the caption of the tab using the GETPROPERTY commands? I do not see anything in RDOCS. James Belisle Making Information Systems People Friendly Since 1990 -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/CH2PR02MB6821371F2A19F0358DCDA156A0A40%40CH2PR02MB6821.namprd02.prod.outlook.com. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/CH2PR02MB68218714920F69806D56923BA0A40%40CH2PR02MB6821.namprd02.prod.outlook.com. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/CH2PR02MB6821A0FD2469A50C14974BC6A0A40%40CH2PR02MB6821.namprd02.prod.outlook.com. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/WC20210118143625.720019%40jjcalibrations.com.
