Javier,
After applying all patches/updates, if you are
still encountering the same oddity, please feel
free to submit an RDCC request with all details
to handle this through our development team.
Once submitted, and reliably replicated, it
should be resolved in a timely manner.
Very Best R;egards,
Razzak
At 01:40 PM 2/12/2021, [email protected] wrote:
Thanks R:azzak,
My tech is working on a Win 7 with Intel Core 7
computer using a version compiled with the
latest X.5. Using 2 monitors 1920x1080, the
primary with the R:Base application and the
extended displays the GIS application we use to
locate roads. I will try moving it to a Win 10
computer, but I also get the same squares on my
setup that runs Win 7 with the latest generation
Intel Core 7 processor, 16 Gb of Memory, 1TB SSD
and two monitors, one a 2560x1080 and the extended is 1920x 1080.
I will run some additional test over the
weekend, but I am not sure what else I can do that I have not already done.
Javier,
Javier Valencia, PE
[email protected]
O: 913-829-0888
C: 913-915-3137
-----Original Message-----
From: [email protected]
<[email protected]> On Behalf Of A. Razzak Memon
Sent: Friday, February 12, 2021 12:09 PM
To: [email protected]
Subject: Re: [RBASE-L] - Two questions
Javier,
Here you go ...
01. While in R:BASE Editor (RBEDIT), click on
R:Style Setup to customize the way you would like R:Style to behave.
See attached two screenshots of my preferred R:Style settings.
02. Depends on your Operating System and Display Settings.
Hope it helps and/or provide you with some blue's clues ...
Very Best R:egards,
Razzak
At 12:50 PM 2/12/2021, [email protected] wrote:
>I have a couple of questions, one probably pretty easy and the second
>not so much.
>
>First question when I write code for EEPs I like to make my variiables
>with set ccombinations of upper and lower case letter to make them more
>readable. For example I would use “vStreetNameâ†which is very easy
>to read but when I run Style to find errors it converts it to
>“vstreetname†which is harder to read. ad. I know there is a setting
>somewhere that prevent case changing but I cannot seem to find it…¦old
>age sucks..
>
>
>
>Second question I have forms that after using them for a whileee
>square frames start to show up as shown in the picture below:
>
>[]
>
>
>
>I thought there were object hidden behind the panels. To verify, I
>printed a list of every component in the form and one at a time
>identified them to make sure all were accounted and in fact I found a
>couple which I deleted and continued checking until there were no
>unaccounted or hidden objects.
>
>I have not found a particular pattern or reason why they show up but
>eventually, the screen freezes and the application has to be restarted.
>The frames seem to show up in the same location and multiply. I have
>checked the form and there is nothing at those location even when I
>have checked behind the grids, panel and tabs and, as I indicated, all
>objects in the form are accounted for. I am stumped. Suggestions will
>be greatly appreciated.
>
>Javier,
>
>Javier Valencia, PE
><mailto:[email protected]>[email protected]
>O: 913-829-0888
>C: 913-915-3137
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are
subscribed to the Google Groups "RBASE-L" group.
To unsubscribe from this group and stop
receiving emails from it, send an email to
[email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/0MCc0S-1l1JUW0vgI-009Md0%40mrelay.perfora.net.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are
subscribed to the Google Groups "RBASE-L" group.
To unsubscribe from this group and stop
receiving emails from it, send an email to
[email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/!%26!AAAAAAAAAAAYAAAAAAAAABa4qWuusAlBoskXxE2AV1mChgAAEAAAACq5XbEaFWFBviAOBLzmvMkBAAAAAA%3D%3D%40vtgonline.com.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google Groups "RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/0LgJSE-1leFL011Vs-00njYg%40mrelay.perfora.net.
