Javier, Sami,
Thank you VERY much. I am SO brain dead today!!!!
It ALMOST worked like a champ. Took me a few minute, but on Netware, it won;t print directly to the device, it comes back as an error. However, as soon as you create a print queue, and then redirect the printer port to the Print Queue, it works GREAT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thank you for the assistance. My old brain needed it today <g>
That's another $1.00 for my duh, Sami <g>
Damon
Damon D. Kaufman
President
Stalder Spring Works, Inc
ISO-9002 / QS-9000 Certified
2345 S. Yellow Springs St.
Springfield, Ohio 45506
Voice 937-322-6120
Fax 937-322-2126
email: [EMAIL PROTECTED]
Damon -� you have to capture the lpt1 port - here is an excerpt from a file
I keep on a DOS client's server...
� 1.. Click on the Start menu.
� 2.. Select Run and click on it.
� 3.. In the text box labeled Open type "cmd.exe".
� 4.. Type the following line:
Net Use lpt1 \\<compname>\<networkdevice>
� � � � � � � � � � � � � � � �� i.e. net use lpt1 \\sms_3\NEC
� � � � � � � � � � � � i.e. net use lpt1 \\ksopprt01\ksopprt29p
i.e. NET USE LPT1 \\WORKSTATION1\HPDeskJet970
� � � � � � This will set the printer to lpt1 and allow you to print from a
DOS program. If you
� � � � � � would like to double check to see that the command was
successful just type
� � � � � � Net Use at the next dos prompt and verify the path following
lpt1.
Good luck!
Sami
